Surface Morphology and Roughness of Sulfur-Doped ZnO Thin Films: Analysis Based on Atomic Force Microscopy
Abstract
The surface morphology of undoped ZnO as well as 3 at. % sulfur-doped ZnO (ZnO:S) thin films were examined utilizing atomic force microscopy (AFM). Surface characteristics evaluations and comparisons were made based on 2D and 3D AFM images, line profile analyses, and roughness parameters; Ra, Rq, Rz, Rt Rsk, and Rku. The undoped ZnO medium showed a smooth surface, with moderate height fluctuations and a comparatively narrow Gaussian-like height. On the other hand, ZnO:S film showed much higher surface roughness and topographical alternation with larger and more symmetrical height histograms. Both the Rq/Ra ratios for both started at around the theoretical Gaussian value (~1.25) with the skewness and kurtosis parameters showing distinctly different degrees of surface symmetry and texture. Sulfur incorporation was shown to change the grain morphology, to introduce peak-to-valley contrast and to increase the overall surface area. The morphological improvements further show that ZnO:S thin films could be more adequate for applications where high surface activity is essential, provided by gas sensing and catalysis. This study presents a quantitative and qualitative evaluation of the influence of sulfur doping on the surface morphology of ZnO at the nanoscale level.
Downloads
References
Z. Zhang, Y. Chen, H. Liu, et al., Sens. Actuators B Chem. 344, 130218 (2021). https://doi.org/10.1016/j.snb.2021.130218
R. Kumar, and O. Al-Dossary, J. Mater. Sci. Mater. Electron. 33, 927 (2022). https://doi.org/10.1007/s10854-021-07491-8
X. Chen, H. Yu, J. Sun, et al., Catal. Sci. Technol. 13, 734 (2023). https://doi.org/10.1039/D2CY01807D
M. Hasanpour, S. Hatamie, and H. Zare, Appl. Surf. Sci. Adv. 2, 100025 (2020). https://doi.org/10.1016/j.apsadv.2020.100025
D. Sharma, K.M. Batoo, and S. Singh, Mater. Sci. Semicond. Process. 151, 106986 (2022). https://doi.org/10.1016/j.mssp.2022.106986
P. Eaton, and P. West, Atomic Force Microscopy, (Oxford University Press, 2020).
S. Moreno-Flores, Prog. Mater. Sci. 120, 100816 (2021). https://doi.org/10.1016/j.pmatsci.2021.100816
A. Wei, Y. Huang, Y. Wang, et al., Thin Solid Films 713, 138341 (2020). https://doi.org/10.1016/j.tsf.2020.138341
H. Hamrouni, H. Saidi, and A. Bouzidi, Mater. Today Commun. 26, 102019 (2021). https://doi.org/10.1016/j.mtcomm.2020.102019
R. Mohan, and V. Krishnakumar, J. Mater. Sci. Mater. Electron. 32, 14053 (2021). https://doi.org/10.1007/s10854-021-06044-9
C. Jayachandraiah, V. Sreenivasulu, and M. Sundararajan, Optik 219, 165051 (2020). https://doi.org/10.1016/j.ijleo.2020.165051
H. J. Kim, S. Y. Kim, and J. H. Lee, Sens. Actuators B Chem. 307, 127675 (2020). https://doi.org/10.1016/j.snb.2019.127675
Y. Liu, X. Wang, and M. Zhang, J. Alloys Compd. 867, 158986 (2021). https://doi.org/10.1016/j.jallcom.2021.158986
S. Zainabidinov, A.Y. Boboev, and N.Y. Yunusaliyev, East Eur. J. Phys. (2), 321 (2024). https://doi.org/10.26565/2312-4334-2024-2-37
S. Zainabidinov, Sh.Kh. Yulchiev, A.Y. Boboev, et al., East Eur. J. Phys. (3), 282 (2024). https://doi.org/10.26565/2312-4334-2024-3-28
S. Z. Zaynabidinov, ShU Yuldashev, A. Y. Boboev, and N. Y. Yunusaliyev, Her. Bauman Moscow State Tech. Univ. Ser. Nat. Sci. 1, 78 (2024).
S.Z. Zainabidinov, A.Y. Boboev, N.Y. Yunusaliyev, and J.N. Usmonov, East Eur. J. Phys. (3), 293 (2024). https://doi.org/10.26565/2312-4334-2024-3-30
M.K. Karimov, U.O. Kutliev, S.B. Bobojonova, and K.U. Otabaeva. Physics and Chemistry of Solid State, 22(4), 742 (2021). https://doi.org/10.15330/pcss.22.4.742-745
M. Nosonovsky, and B. Bhushan, J. Appl. Phys. 105, 104303 (2009). https://doi.org/10.1063/1.3130404
Copyright (c) 2025 Akramjon Y. Boboev, Nuritdin Y. Yunusaliyev, Khushroy A. Makhmudov, Fayzuloh A. Abdulkhaev, Gaybullo G. Tojiboyev, Mohlaroyim O. G‘ofurjonova
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
