Performance Enhancement via Numerical Modeling and Optimization of FASnI3 Perovskite Solar Cell
Abstract
Perovskite-based solar cells are currently attracting growing interest from researchers and industry alike, thanks to the advantages of this type of solar cell, particularly in terms of manufacturing simplicity and the promising power conversion efficiency, which has recently reached remarkable levels. This paper focuses on numerical simulation to improve the performance of the Formamidinium Tin Iodide (FASnI3) solar cell configuration by using Cerium Dioxide (CeO2) as ETL and Poly (Triaryl Amine) (PTAA) as HTL. The simulation has been carried out using Solar Cell Capacitance Simulator (SCAPS-1D) tool under the spectrum of AM 1.5 G. An intensive modeling has been realized to improve the output parameters of the suggested configuration based on FASnI3 as absorber. The proposed structure (ITO/CeO2/FaSnI3/PTAA/Au) achieves a tremendous power conversion efficiency (PCE) of 39.24%, an open-circuit voltage (VOC) of 1.31 V, a short-circuit current density (JSC) of 33.7 mA/cm2 and a fill factor (FF) of 90.12%.
Downloads
References
A.R. Mollick, and Md.A. Ashraf, “Numerical Simulation of Cs2AgBiBr6-based Perovskite Solar Cell with ZnO Nanorod and P3HT as the Charge Transport Layers,” Physica B: Condensed Matter, 618, 413187 (2021). https://doi.org/10.1016/j.physb.2021.413187
A. Yousfi, O. Saidani, Z. Messai, R. Zouache, et al., “Design and Simulation of a Triple Absorber Layer Perovskite Solar Cell for High Conversion Efficiency,” East European Journal of Physics, (4), 137-146 (2023). https://doi.org/10.26565/2312-4334-2023-4-14
NREL Efficiency chart, (2023), https://www.nrel.gov/pv/assets/images/cell-pv-eff-emergingpv.png
E. Zimmermann, K. Wong, M. Müller, H. Hu, P. Ehrenreich, et al., “Characterization of perovskite solar cells: Towards a reliable measurement protocol,” APL Materials, 4(9), 091901 (2016). https://doi.org/10.1063/1.4960759
O.A. Muhammed, E. Danladi, P.H. Boduku, J. Tasiu, M.S. Ahmad, and N. Usman, “Modeling and Simulation of Lead-Free Perovskite Solar Cell Using SCAPS-1D,” East European Journal of Physics, (2), 146-154 (2021). https://doi.org/10.26565/2312-4334-2021-2-12
C.H. Liao, Md.A. Mahmud, and A. Ho-Baillie, “Recent progress in layered metal halide perovskites for solar cells, photodetectors, and field-effect transistors,” Nanoscale, 15, 4219-4235 (2023). https://doi.org/10.1039/D2NR06496K
E. Danladi, D.S. Dogo, S.U. Michael, F.O. Uloko, and A.O. Salawu, “Recent Advances in Modeling of Perovskite Solar Cells Using SCAPS-1D: Effect of Absorber and ETM Thickness,” East European Journal of Physics, (4), 5-17 (2021). https://doi.org/10.26565/2312-4334-2021-4-01
S. Rabhi, H. Benzouid, A. Slami, and K. Dadda, “Modeling and Numerical Simulation of a CH3NH3SnI3 Perovskite Solar Cell Using the SCAPS1-D Simulator,” Eng. Proc. 56(1), 97 (2023). https://doi.org/10.3390/ASEC2023-15300
S. Imani, S.M. Seyed-Talebi, J. Beheshtian, et al., “Simulation and characterization of CH3NH3SnI3-based perovskite solar cells with different Cu-based hole transporting layers,” Appl. Phys. A, 129, 143 (2023). https://doi.org/10.1007/s00339-023-06428-0
L. Ghalmi, S. Bensmaine, and C.E.H. Merzouk, “Optimizing the Performance of Lead-free CH3NH3SnI3 Perovskite Solar Cells via Thickness, Doping, and Defect Density Control,” Journal of Science, Technology and Engineering Research, 4(1), 44-51 (2023). https://doi.org/10.53525/jster.1231984
M.K. Hossain, M. Rubel, G.F.I. Toki, et al., “Effect of Various Electron and Hole Transport Layers on the Performance of CsPbI3-Based Perovskite Solar Cells: A Numerical Investigation in DFT, SCAPS-1D, and wxAMPS Frameworks,” ACS Omega, 7, 43210−43230 (2022). https://doi.org/10.1021/acsomega.2c05912
E. Katunge, G. Njema, and J. Kibet, “Theoretical analysis of the electrical characteristics of lead‐free formamidinium tin iodide solar cell,” IET Optoelectronics, 17(5), 220-236 (2023). https://doi.org/10.1049/ote2.12104
P. Tiwari, M.F. Alotaibi, Y. Al-Hadeethi, V. Srivastava, et al., “Design and Simulation of Efficient SnS-Based Solar Cell Using Spiro-OMeTAD as Hole Transport Layer,” Nanomaterials, 12(14), 2506 (2022). https://doi.org/10.3390/nano12142506
A.B. Coulibaly, S.O. Oyedele, N.R. Kre, and B. Aka, “Comparative Study of Lead-Free Perovskite Solar Cells Using Different Hole Transporter Materials. Modeling and Numerical Simulation,” Modeling and Numerical Simulation of Material Science, 9(4), 97 107 (2019). https://doi.org/10.4236/mnsms.2019.94006
A.K. Al-Mousoi, M.K.A. Mohammed, R. Pandey, J. Madan, et al., “Simulation and analysis of lead-free perovskite solar cells incorporating cerium oxide as electron transporting layer,” RSC Adv. 50(12), 32365-32373 (2022). https://doi.org/10.1039/D2RA05957F
K. Ukoba, P.E. Imoisili, and T.C. Jen, “Numerical analysis and performance improvement of nanostructured Cu2O/TiO2pn heterojunction solar cells using SCAPS,” Materials Today: Proceedings, 38(2), 887-892 (2021). https://doi.org/10.1016/j.matpr.2020.05.111
M. Burgelman, P. Nollet, and S. Degrave, “Modelling polycrystalline semiconductor solar cells,” Thin Solid Films, 361–362, 527 532 (2000). https://doi.org/10.1016/S0040-6090(99)00825-1
S. Bhattarai, D. Borah, J. Rout, R. Pandey, J. Madan, et al., “Designing an efficient lead-free perovskite solar cell with green-synthesized CuCrO2 and CeO2 as carrier transport materials,” RSC Adv. 13(49), 34693-34702 (2023). http://dx.doi.org/10.1039/D3RA06722J
Sk.T. Ahamed, Ar. Basak, A. Mondal, “Device modeling and investigation of Sb-based low-cost heterojunction solar cells using SCAPS-1D,” Results in Optics, 10, 100364 (2023). https://doi.org/10.1016/j.rio.2023.100364
M. Ismail, M. Noman, S.T. Jan, and M. Imran, “Boosting efficiency of ecofriendly perovskite solar cell through optimization of novel charge transport layers,” R. Soc. Open Sci. 10(6), 230331 (2023). https://doi.org/10.1098/rsos.230331
S.T. Jan, and N. Muhammad, “Influence of layer thickness, defect density, doping concentration, interface defects, work function, working temperature and reflecting coating on lead-free perovskite solar cell,” Solar Energy, 237, 29-43 (2022). https://doi.org/10.1016/j.solener.2022.03.069
B. Atanu, R. Radhakrishnan, R. Nekovei, and R. Jeyakumar, “Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation,” Solar Energy, 196, 177-182 (2020). https://doi.org/10.1016/j.solener.2019.12.014
I. Mesquita, L. Andrade, and A. Mendes, “Temperature Impact on Perovskite Solar Cells Under Operation,” Chem. Sus. Chem. 12(10), 2186-2194 (2019). https://doi.org/10.1002/cssc.201802899
P. Roy, N.K. Sinha, and A. Khare, “An investigation on the impact of temperature variation over the performance of tin-based perovskite solar cell: A numerical simulation approach,” Materials Today: Proceedings, 39(5), 2022-2026 (2021). https://doi.org/10.1016/j.matpr.2020.09.281
H. Baig, H. Kanda, A.M. Asiri, M.K. Nazeeruddin, and T. Mallick, “Increasing efficiency of perovskite solar cells using low concentrating photovoltaic systems,” Sustainable Energy Fuels, 4(2), 528-537 (2020). http://dx.doi.org/10.1039/C9SE00550A
A. Gholami-Milani, S. Ahmadi-Kandjani, B. Olyaeefar, et al., “Performance analyses of highly efficient inverted all-perovskite bilayer solar cell,” Sci. Rep. 13, 8274 (2023). https://doi.org/10.1038/s41598-023-35504-x
R. Priyanka, T. Sanjay, and K. Ayush, “An investigation on the influence of temperature variation on the performance of tin (Sn) based perovskite solar cells using various transport layers and absorber layers,” Results in Optics, 4, 100083, (2021). https://doi.org/10.1016/j.rio.2021.100083
N. Rono, A.E. Merad, J.K. Kibet, et al., “A theoretical investigation of the effect of the hole and electron transport materials on the performance of a lead-free perovskite solar cell based on CH3NH3SnI3,” J. Comput. Electron. 20, 993–1005 (2021). https://doi.org/10.1007/s10825-021-01673-z
J. Arayro, R. Mezher, and H. Sabbah, “Comparative Simulation Study of the Performance of Conventional and Inverted Hybrid Tin-Based Perovskite Solar Cells,” Coatings, 13(7), 1258 (2023). https://doi.org/10.3390/coatings13071258
O. Mostafa, N.A. Zidan, W. Abbas, H.H. Issa, N. Gamal, and M. Fedawy, “Design and performance optimization of lead-free perovskite solar cells with enhanced efficiency,” Mathematical Modelling of Engineering Problems, 10(4), 1307-1316 (2023). https://doi.org/10.18280/mmep.100424
G.W. Kim, D. Shinde, and T. Park, “Thickness of the hole transport layer in perovskite solar cells: performance versus reproducibility,” RSC Adv. 5(120), 99356-99360 (2015). http://dx.doi.org/10.1039/C5RA18648J
Md.A. Islam, Md.N.B. Alamgir, S.I. Chowdhury, and S.M.B. Billah, “Lead-free organic inorganic halide perovskite solar cell with over 30% efficiency,” Journal of Ovonic Research, 18, 395-409 (2022). https://doi.org/10.15251/JOR.2022.183.395
H. Sabbah, J. Arayro, and R. Mezher, “Simulation and Investigation of 26% Efficient and Robust Inverted Planar Perovskite Solar Cells Based on GA0.2FA0.78SnI3-1%EDAI2 Films,” Nanomaterials, 12, 3885 (2022). https://doi.org/10.3390/nano12213885
Hui-Jing Du, et al., “Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency,” Chinese Physics B, 25(10), 108802 (2016). https://dx.doi.org/10.1088/1674-1056/25/10/108802
P.K. Patel, “Device simulation of highly efficient eco-friendly CH3NH3SnI3 perovskite solar cell,” Sci. Rep. 11, 3082 (2021). https://doi.org/10.1038/s41598-021-82817-w
V.M. le Corre, M. Stolterfoht, L.P. Toro, M. Feuerstein, et al., “Charge Transport Layers Limiting the Efficiency of Perovskite Solar Cells: How to Optimize Conductivity, Doping, and Thickness,” ACS Appl. Energy Mater. 2, 6280−6287 (2019). https://doi.org/10.1021/acsaem.9b00856
J. Avila, L. Gil-Escrig, P. Boix, M. Sessolo, S. Albrecht, and H.J. Bolink, “Influence of doped charge transport layers on efficient perovskite solar cells,” Sustainable Energy Fuels, 2(11), 2429-2434 (2018). http://dx.doi.org/10.1039/C8SE00218E
F. Peña-Camargo, J. Thiesbrummel, H. Hempel, A. Musiienko, et al., “Revealing the doping density in perovskite solar cells and its impact on device performance,” Appl. Phys. Rev. 9(2), 021409 (2022). https://doi.org/10.1063/5.0085286
M. Ahamad, and A.K.M. Hossain, “Design and optimization of non-toxic and highly efficient tin-based organic perovskite solar cells by device simulation,” Heliyon, 9(9), e19389 (2023). https://doi.org/10.1016/j.heliyon.2023.e19389
Y. Wan-Jian, S. Tingting, and Y. Yanfa, “Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber,” Appl. Phys. Lett. 104(6), 063903 (2014). https://doi.org/10.1063/1.4864778
S.H. Huang, Z. Rui, D. Chi, and D. Bao, “Influence of defect states on the performances of planar tin halide perovskite solar cells,” J. Semicond. 40(3), 032201 (2019). http://doi.org/10.1088/1674-4926/40/3/032201
H.K. Ibrahim, A.M.A. Sabaawi, and Q.T. Aljwari, “A Comprehensive Study on the Effect of Defects on Perovskite Solar Cell Performance,” Preprints, 1, 344 (2023). https://doi.org/10.20944/preprints202306.0344.v1
S.R. Hosseini, M. Bahramgour, P.Y. Sefidi, et al., “Investigating the effect of non-ideal conditions on the performance of a planar,” Heliyon, 8(11), e11471 (2022). https://doi.org/10.1016/j.heliyon.2022.e11471
R. Ranjan, N. Anand, M.N. Tripathi, et al., “SCAPS study on the effect of various hole transport layer on highly efficient 31.86% eco-friendly CZTS based solar cell,” Sci. Rep. 13, 18411 (2023). https://doi.org/10.1038/s41598-023-44845-6
F. Behrouznejad, S. Shahbazi, N. Taghavinia, et al., “A study on utilizing different metals as the back contact of CH3NH3PbI3 perovskite solar cells,” J. Mater. Chem. A, 4(35), 13488–13498 (2016). https://doi.org/10.1039/C6TA05938D
H. Sharma, and R. Srivastava, “Solution-processed pristine metal oxides as electron-transporting materials for perovskite solar cells,” Front. Electron. Mater. 3, 1174159 (2023). https://doi.org/10.3389/femat.2023.1174159
Copyright (c) 2024 Lahcene Kanouni, Lamir Saidi, Abderrahim Yousfi, Okba Saidani
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).