Importance of Reflected Solar Energy Loaded with SWCNTs-MWCNTs/EG Darcy Porous Stretched Surface: Midrich Scheme
Abstract
Saving energy, shortening processing times, maximizing thermal efficiency, and lengthening the life of industrial equipment are all possible outcomes of heating and cooling optimization. In recent years, there has been a rise in interest regarding the development of high-efficiency thermal systems for the purpose of enhancing heat and mass movement. This study presents an investigation on the non-linear flow of a hybrid nanofluid comprising of Multi Walled Carbon Nanotubes (MWCNTs) and Single Walled Carbon Nanotubes (SWCNTs) over an extended surface, considering the effects of Magnetohydrodynamics (MHD) and porosity, with engine oil serving as the base fluid. Also, radiation and Darcy-Forchheimer flow is considered. The problem of regulating flow is transformed into ordinary differential equations (ODEs) by employing similarity variables. The Midrich Scheme is then used to implement a numerical solution to these equations in the program Maple. Through visual representations of fluid velocities and temperatures, the inquiry addresses several important factors, including magnetic parameters, porosity parameters, radiation parameters, Eckert numbers, inertia coefficients, and Biot numbers. The research has important implications in a number of real-world contexts. Due to its exceptional characteristics, such as reduced erosion, reduced compression drops difficulties, and greatly increased heat transfer rates, hybrid nanofluids are frequently used in heat exchangers. For instance, various cooling devices such as electromagnetic cooling systems, as well as heat exchangers including condensers, boilers, chillers, air conditioners, evaporators, coil preheaters, and radiators. Furthermore, it has the potential to be employed in pharmaceutical businesses and the field of biomedical nanoscience.
Downloads
References
S.U. Choi, and J.A. Eastman, Enhancing Thermal Conductivity of Fluids with Nanoparticles, Technical Report, (Argonne National Lab. Argonne, IL, USA, 1995).
A. Venkateswarlu, S. Suneetha, M.J. Babu, J.G. Kumar, C.S.K. Raju, and Q. Al-Mdallal, “Significance of Magnetic Field and Chemical Reaction on the Natural Convective Flow of Hybrid Nanofluid by a sphere with viscous dissipation: A statistical Approach,” Nonlinear Engineering, 10, 563–573 (2021). https://doi.org/10.1515/nleng-2021-0047
A.B. Vishalakshi, R. Mahesh, U.S. Mahabaleshwar, A.K. Rao, L.M. Pérez, and D. Laroze, “MHD Hybrid Nanofluid Flow over a Stretching/Shrinking Sheet with Skin Friction: Effects of Radiation and Mass Transpiration,” Magnetochemistry, 9, 118 (2023). https://doi.org/10.3390/magnetochemistry9050118
P.S. Reddy, P. Sreedevi, and A.J. Chamkha, “Hybrid Nanofluid Heat and Mass Transfer Characteristics Over a Stretching/Shrinking Sheet with Slip Effects,” Journal of Nanofluids, 12, 251–260 (2023). https://doi.org/10.1166/jon.2023.1996
U. Farooq, M. Tahir, H. Waqas, T. Muhammad, A. Alshehri, and M. Imran, “Investigation of 3D flow of magnetized hybrid nanofluid with heat source/sink over a stretching sheet,” Sci. Rep. 12(1), 12254 (2022). https://doi.org/10.1038/s41598-022-15658-w
M. Nadeem, I. Siddique, J. Awrejcewicz, et al., “Numerical analysis of a second-grade fuzzy hybrid nanofluid flow and heat transfer over a permeable stretching/shrinking sheet,” Sci. Rep. 12, 1631 (2022). https://doi.org/10.1038/s41598-022-05393-7
S. Iijima, “Helical microtubules of graphitic carbon,” Nature, 354, 56–58 (1991). https://doi.org/10.1038/354056a0
P.M. Ajayan, and S. lijima, “Capillarity-induced filling of carbon nanotubes,” Nature, 361, 333–334 (1993). https://doi.org/10.1038/361333a0
K. Subbarayudu, S. Suneetha, P.B.A. Reddy, and A.M. Rashad, “Framing the activation energy and binary chemical reaction on CNT’s with Cattaneo-Christov heat diffusion on Maxwell Nano fluid in the presence of non-linear thermal radiation,” Arabian journal of Science and Engineering, 44, 10313–10325 (2019). https://doi.org/10.1007/s13369-019-04173-2
L. Wahidunnisa, S. Suneetha, S.R.R. Reddy, and P.B.A. Reddy, “Comparative study on electromagnetohydrodynamic SWCNT-water dusty nanofluid in the presence of radiation and Ohmic heating,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(4), 950-958 (2021). https://doi.org/10.1177/0954408920985735
S. Suneetha, L. Wahidunnisa, A. Divya, and P.B.A. Reddy, “Electrical magnetohydrodynamic flow of kerosene oil-based carbon nanotube’s Maxwell nanofluid in the presence of non-linear radiation and Cattaneo-Christov heat diffusion: Applications in aerospace industry,” Proc. Mech. E, Part E: J. Process Mechanical Engineering, 237, 1670–1678 (2022). https://doi.org/10.1177/09544089221125100
G. Ramasekhar, and P.B. Reddy, “Numerical analysis of significance of multiple shape factors in Casson hybrid nanofluid flow over a rotating disk,” International Journal of Modern Physics B, 37(12), 2350113 (2023). https://doi.org/10.1142/S0217979223501138
R. Tabassum, A. Al-Zubaidi, S. Rana, R. Mehmood, and S. Saleem, “Slanting transport of hybrid (MWCNTs-SWCNTs/H2O) nanofluid upon a Riga plate with temperature dependent viscosity and thermal jump condition,” International Communications in Heat and Mass Transfer, 135, 106165 (2022). https://doi.org/10.1016/j.icheatmasstransfer.2022.106165
E. Tayari, L. Torkzadeh, D. Domiri Ganji, et al., “Investigation of hybrid nanofluid SWCNT–MWCNT with the collocation method based on radial basis functions,” Eur. Phys. J. Plus. 138, 3 (2023). https://doi.org/10.1140/epjp/s13360-022-03601-x
A.M. Obalalu, M.A. Memon, and O.A. Olayemi, et al., “Enhancing heat transfer in solar-powered ships: a study on hybrid nanofluids with carbon nanotubes and their application in parabolic trough solar collectors with electromagnetic controls,” Sci. Rep. 13, 9476 (2023). https://doi.org/10.1038/s41598-023-36716-x
Z. Shah, A. Tassaddiq, S. Islam, A.M. Alklaibi, and I. Khan, “Cattaneo–Christov heat flux model for three-dimensional rotating flow of SWCNT and MWCNT nanofluid with Darcy–Forchheimer porous medium induced by a linearly stretchable surface,” Symmetry, 11(3), 331 (2019). https://doi.org/10.3390/sym11030331
G. Ramasekhar, and P.B.A. Reddy, “Entropy generation on Darcy-Forchheimer ow of copper-aluminium oxide/water hybrid nanofluid over a rotating disk: Semi-analytical and numerical approaches,” Scientia Iranica. Transaction F, Nanotechnology, 30(6), 2245-2259 (2023). https://doi.org/10.24200/sci.2023.60134.6617
I. Rashid, T. Zubair, and M.I. Asjad, “Tag-Eldin E.M. The Influence of Aligned MHD on Engine Oil-Based Casson Nanofluid with Carbon Nanotubes (Single and Multi-Wall) Passing through a Shrinking Sheet with Thermal Radiation and Wall Mass Exchange,” Micromachines (Basel), 13(9), 1501 (2022). https://doi.org/10.3390/mi13091501
S.R.R. Reddy, P.B.A. Reddy, and S. Suneetha, “Magnetohydro Dynamic Flow of Blood in A Permeable Inclined Stretching Viscous Dissipation, Non-Uniform Heat Source/Sink and Chemical Reaction,” Frontiers in Heat and Mass Transfer, 10(22), 1 10 (2018). https://doi.org/10.5098/hmt.10.22
M. Ramzan, F. Ali, N. Akkurt, et al., “Computational assesment of Carreau ternary hybrid nanofluid influenced by MHD flow for entropy generation,” J. Magn. Magn. Mater. 567, 170353 (2023). https://doi.org/10.1016/j.jmmm.2023.170353
G. Ramasekhar, and P.B.A. Reddy, “Entropy generation on EMHD Darcy-Forchheimer flow of Carreau hybrid nano fluid over a permeable rotating disk with radiation and heat generation: Homotopy perturbation solution,” Proc. Inst. Mech. Eng. Part E, J. Process Mech. Eng. 237(4), 1179–1191 (2022). https://doi.org/10.1177/09544089221116575
S. Ahmad, S. Nadeem, N. Muhammad, and A. Issakhov, “Radiative SWCNT and MWCNT nanofluid flow of Falkner–Skan problem with double stratification,” Phys. A, Stat. Mech. Appl. 547, 124054 (2020). https://doi.org/10.1016/j.physa.2019.124054
Copyright (c) 2024 Gunisetty Ramasekhar, Sangapatnam Suneetha, Vanipenta Ravikumar, Shaik Jakeer, Seethi Reddy Reddisekhar Reddy
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
