Вплив струму Холла, теплового розсіювання та тепловиділення на потік нанорідини TiO2 на основі гасу через обертовий пористий канал

  • Венкатешварлу Малапаті Кафедра математики, Академія вищої освіти Сіддхартхи, Віджаявада, Андхра-Прадеш, Індія https://orcid.org/0000-0002-6320-0195
  • Мохаммед Алмаккі Школа інженерії, архітектури та дизайну інтер'єрів, Університет Аміті; Міжнародне академічне місто Дубая https://orcid.org/0000-0002-9348-4651
  • В.Б. Раджакумар Комараволу Кафедра математики, Технологічний інститут Каллама Харанадхаредді, Гунтур, Андхра-Прадеш, Індія https://orcid.org/0000-0002-2667-8042
Ключові слова: нанорідина, потік Куетта, струм Холла, теплоутворення, відсмоктування

Анотація

На відміну від тепловиділення та теплового розсіювання, досліджуються струм Холла та коефіцієнти обертання розряду нанорідини діоксиду титану на основі гасу через дві паралельні стінки, вбудовані в пористий канал. Розглядаються фактори всмоктування та гідромагнітні фактори. Використовуючи відповідні початкові та граничні умови, підхід збурень може дати точне аналітичне рішення для визначальних рівнянь для швидкості, температури та концентрації нанорідини. Можна отримати вирази для напруження зсуву, швидкості масопередачі та швидкості теплопередачі на пластинах. З одного боку, показано графічне представлення первинної та вторинної швидкостей, температури нанорідини та концентрації частинок. Однак, для різних значень відповідних коефіцієнтів течії, числові оцінки напруження зсуву, швидкості масопередачі та швидкості теплопередачі для стінок представлені у табличній формі. Через внесок сили плавучості розчиненої речовини, результуючі профілі первинної та вторинної швидкості постійно зростають до високого рівня. Концентрація збільшується разом зі збільшенням характеристик тепловиділення та теплодифузії по всій нанорідині. Коли сила теплової плавучості достатньо висока, профілі первинної та вторинної швидкості зменшуються. Струм Холла та параметр Дарсі підвищують коефіцієнти первинного та вторинного тертя поверхні на верхній стінці, одночасно зменшуючи їх на нижній. Однак на первинні та вторинні коефіцієнти тертя поверхні впливають протилежним чином сила теплової плавучості та магнітний параметр. Результати порівнюються з існуючою літературою.

Завантаження

##plugins.generic.usageStats.noStats##

Посилання

D. O. Soumya, B. J. Gireesha, and P. Venkatesh, “Generalized Couette flow of nanoliquid among two concentric channels with particles injection,” International Journal of Ambient Energy, 45, Article 2353305 (2024). https://doi.org/10.1080/01430750.2024.2353305

L. Swain, R. P. Sharma, and S. R. Mishra, “Diversified role of nanoparticle concentration and radiating heat on the natural convection Couette flow through a vertical channel,” Colloid and Polymer Science, 302, 1687-1700 (2024). http://dx.doi.org/10.1007/s00396-024-05294-3

G. Ali, M. Ahmad, F. Ali, A. Khan, and I. Khan, “Couette flow of viscoelastic dusty fluid through a porous oscillating plate in a rotating frame along with heat transfer,” Heat Transfer, 53, 4588-4607 (2024). https://doi.org/10.1002/htj.23127

M. Venkateswarlu, D.V. Lakshmi, O.D. Makinde, “Thermodynamics analysis of Hall current and Soret number on hydromagnetic Couette flow in a rotating system with a convective boundary condition, Heat Transfer Research,” 51, 83-101 (2020). https://doi.org/10.1615/HeatTransRes.2019027139

S. L. Sun, D. Liu, C. Kang, H. B. Kim, Y. Z. Song, and P. G. Zhang, “Numerical simulation and machine learning study on heat transfer enhancement of nanofluids in Taylor–Couette flow with an elliptical slit surface,” International Communications in Heat and Mass Transfer, 163, Article 108788 (2025). https://doi.org/10.1016/j.icheatmasstransfer.2025.108788

M. Venkateswarlu, P. Bhaskar, and O. D. Makinde, “Mathematical study of nonlinear mixed convection unsteady flow in a parallel plate inclined channel in the proximity of time periodic boundary conditions: flow reversal,” Journal of Nanofluids, 10, 598-607 (2021). https://doi.org/10.1166/jon.2021.1802

R. Gupta, “Analyzing the impact of magnetic field, squeezing, and volume fraction on Magnetohydrodynamic nanofluid flow using a differential transform method,” Journal of Nanofluids, 14, 596-605 (2025). https://doi.org/10.1166/jon.2025.2261

R. Arpitha, K. Ramesh, and D. Srikanth, “Temperature and mass dispersion of mixed convective MHD Casson nanofluid flow through porous medium,” International Journal of Applied and Computational Mathematics, 11, 1-25 (2025). https://doi.org/10.1007/s40819-025-01882-1

F. S. Bayones, A. M. Abd-Alla, and E. N. Thabet, “Magnetized dissipative Soret effect on nonlinear radiative Maxwell nanofluid flow with porosity, chemical reaction and Joule heating,” Waves in Random and Complex Media, 34, 6270-6288 (2024). https://doi.org/10.1080/17455030.2021.2019352

S. Mudoi, D. Sarma, and A. K. Sarma, “Newtonian fluid flow with heat and mass transfer across an inclined sheet and magnetic field with Soret effects,” Journal of the Korean Physical Society, 86, 280-291 (2025). https://doi.org/10.1007/s40042-024-01278-2

H. Basha, N. B. Naduvinamani, and M, Shridhar, “Numerical analysis of velocity slip and magnetic Soret effect on dissipative Maxwell liquid motion about a stretching wall with heat source/sink,” Numerical Heat Transfer, Part B: Fundamentals, 86, 2721-2745 (2025). https://doi.org/10.1080/10407790.2024.2347613

M. Venkateswarlu, P.R. Reddy, and K.J. Lakshmi, “Analytical study of Soret and Dufour effects on heat destructive Casson liquid movement past an infinite vertical plate,” Journal of Naval Architecture and Marine Engineering, 21, 27-40 (2024). https://doi.org/10.3329/jname.v21i1.69228

P. Pandey, “Chemical reaction and heat source effects on oscillatory suction in MHD flow through permeable media with Soret effect,” Aircraft Engineering and Aerospace Technology, 97, 149-161 (2025). https://doi.org/10.1108/AEAT-01-2024-0023

S. Jangid, and K. Kolla, “Magnetic field and Soret effect on mixed convection Williamson fluid model through a vertical channel using artificial neural network,” International Journal of Numerical Methods for Heat & Fluid Flow, 35, 4333-4365 (2025). https://doi.org/10.1108/HFF-10-2024-0781

S. Ahamedsheriff, V. Rajaram, G. Mani, S. T. Thabet, and I. Kedim, “Impacts of soret and Dufour possessions on micropolar fluid past a stretching sheet in a porous medium,” Scientific Reports, 15, 33059 (2025). https://doi.org/10.1038/s41598-025-18302-5

A. K. Sarma, D. Sarma, and S. Mudoi, “Magnetohydrodynamic flow and effects of Soret, Dufour and thermophoresis through a chemically reacting porous stretching plate,” Sigma, 43, 1533-1546 (2025). https://doi.org/10.14744/sigma.2025.00150

M. Venkateswarlu, and D.V. Lakshmi, “Diffusion-thermo and heat source effects on the unsteady radiative MHD boundary layer slip flow past an infinite vertical porous plate,” Journal of Naval Architecture and Marine Engineering, 18, 55-72 (2021). https://doi.org/10.3329/jname.v18i1.33024

M. Venkateswarlu, and D.V. Lakshmi, “Thermal diffusion, hall current and chemical reaction effects on unsteady MHD natural convective flow past a vertical plate,” U. P. B. Sci. Bull., Series D: Mechanical Engineering, 79, 91-106 (2017).

O. D. Makinde, M. Venkateswarlu, and R. L. Monaledi, “Unsteady MHD flow of radiating and rotating fluid with Hall current and thermal diffusion past a moving plate in a porous medium,” Defect and Diffusion Forum, 389, 71-85 (2018). https://doi.org/10.4028/www.scientific.net/DDF.389.71

S. Jayanthi, and H. Niranjan, “A vertical surface flow analysis of MHD nanofluids influenced by radiation, viscous dissipation, and joule heating with Soret and Dufour effects,” Contemporary Mathematics, 5, 2296-2314 (2024). https://doi.org/10.37256/cm.5220244318

M. Venkateswarlu, and M. Phanikumar, “Soret and heat source effects on MHD flow of a viscous fluid in a parallel porous plate channel in presence of slip condition,” U. P. B. Sci. Bull., Series D: Mechanical Engineering, 79, 171-186 (2017).

M. Venkateswarlu, and O. D. Makinde, Unsteady MHD slip flow with radiative heat and mass transfer over an inclined plate embedded in a porous medium, Defect and Diffusion Forum, 384, 31-48 (2018). https://doi.org/10.4028/www.scientific.net/DDF.384.31

Y. Ouyang, M.F.M. Basir, K. Naganthran, and I. Pop, “Exploring heat generation and magnetic effects on unsteady ternary nanofluid flow over a dynamic wedge in porous media,” Chinese Journal of Physics, 93, 531-548 (2025). https://doi.org/10.1016/j.cjph.2024.12.026

S. Dey, S. Mukhopadhyay, and K. Vajravelu, “Thermo‐solutal nonlinear convection in a nanofluid flow past a porous plate in the presence of heat generation/absorption,” Heat Transfer, 54, 1394-1419 (2025). https://doi.org/10.1002/htj.23221

A. K. Hussein, S. E. Ahmed, M. A. Mansour, O. Younis, and L. Kolsi, “Effects of radiation and heat generation on MHD mixed convection in a double lid-driven inclined wavy porous cavity filled with non-Newtonian nanofluid and including a cross-shape heaters,” Waves in Random and Complex Media, 35, 5587-5614 (2025). https://doi.org/10.1080/17455030.2022.2071503

M. Venkateswarlu, M. Phani Kumar, and O. D. Makinde, “Establishment of impulsive and accelerated motions of Casson fluid in an inclined plate in the proximity of MHD and heat generation,” Periodica Polytechnica Mechanical Engineering, 66, 219 230 (2022). https://doi.org/10.3311/PPme.19424

Y. S. Daniel, Z. Ismail, P. Ayuba, S. Daniel, P. Anthony, P. N. Okolo, and A. S. Magaji, “Radiative heat transfer and Ohmic heating on unsteady EMHD mixed convective flow for dual stratified nanofluid,” Modeling Earth Systems and Environment, 11, 1-19 (2025). https://doi.org/10.1007/s40808-025-02387-y

M. Z. Kefene, and E. H. Rikitu, “Magnetic and thermal radiation effects on hematocrit-dependent blood nanofluid flow in an inclined stenotic artery with heat generation,” Brazilian Journal of Physics, 55, 1-12 (2025). https://doi.org/10.1007/s13538-025-01770-5

M. Venkateswarlu, P. Rami Reddy, and K. J. Lakshmi, “Nonlinear unsteady MHD flow in an inclined channel with suction and heat generation: time periodic boundary conditions,” Journal of Naval Architecture and Marine Engineering, 22, 199-216 (2025). https://doi.org/10.3329/jname.v22i2.75405

M. S. Ram, M. D. Shamshuddin, C. Satyanarayana, and S. O. Salawu, “Stagnation point flow of magnetized convective nanofluid via porous stretchy surface subjected to ohmic heating and heat generation,” International Journal of Modelling and Simulation, 45, 1346-1360 (2025). https://doi.org/10.1080/02286203.2023.2281009

M. Venkateswarlu, M. B. Chennaiah, and Md. Noor, “Significance of cross diffusion on the transient behavior of radiationg Casson fluid near a heated slanted plate,” Bulletin of the Parana Mathematical Society, 43, 1-19 (2025). https://doi.org/10.5269/bspm.78525

Z. Abbas, S. Goher, and M. Y. Rafiq, “Interfacial flow and heat transfer analysis of kerosene–TiO₂ and water–Al₂O₃ nanofluids in shear-driven boundary layers,” Journal of Engineering Research, (2025). https://doi.org/10.1016/j.jer.2025.12.001

Опубліковано
2026-09-07
Цитовано
Як цитувати
Малапаті, В., Алмаккі, М., & Комараволу, В. Р. (2026). Вплив струму Холла, теплового розсіювання та тепловиділення на потік нанорідини TiO2 на основі гасу через обертовий пористий канал. Східно-європейський фізичний журнал, (3), 415-431. https://doi.org/10.26565/2312-4334-2026-3-38