Computational Investigation on the Structural, Electronic and Magnetic Properties of Si-Doped L10 FeNi Alloy for Clean Energy
Abstract
For the first time, this study conducts a computational analysis by employing density functional theory (DFT) to investigate the effects of silicon doping as substitutional defects on the structural, electronic, and magnetic characteristics of the L10-FeNi alloy. The aim of this study was to explore the potential applications of Si-doped FeNi compounds as alternatives to rare-earth permanent magnets. For this, we have performed full potential calculations of L10-FeNi with substitutional Si-doping within a generalized gradient approximation. Two types of substitutional Si-doping (ONi/OFe) in the Ni/Fe site of the parent alloy have been investigated. The computed formation energy (Ef) indicates that the incorporation of silicon defects increases the structural stability of tetragonally distorted L10-FeNi. Moreover, our findings demonstrate that the FeNi:Si(ONi) in the L10-structure has a stable saturation magnetization (Ms), whereas the FeNi:Si (OFe) has a small reduction in Ms. Therefore, Si-substituted FeNi alloys can be tuned to become a good candidate for permanents magnets.
Downloads
References
J. Ormerod, Permanent magnet markets and applications. In Modern Permanent Magnets, (Woodhead Publishing, 2022), pp. 403-434.
A.H. King, and R.G. Eggert, Critical materials for permanent magnets. In Modern Permanent Magnets, (Woodhead Publishing, 2022), pp. 343-370.
J.M.D. Coey, “Perspective and prospects for rare earth permanent magnets,” Engineering, 6(2), 119-131 (2020). https://doi.org/10.1016/j.eng.2018.11.034
Z. Shao, and S. Ren, “Rare-earth-free magnetically hard ferrous materials,” Nanoscale Adv. 2(10), 4341-4349 (2020). https://doi.org/10.1039/D0NA00519C
A. H. King, and R. G. Eggert, Critical materials for permanent magnets. In Modern Permanent Magnets, (Woodhead Publishing, 2022), pp. 343-370, https://doi.org/10.1016/B978-0-323-88658-1.00003-0
H. Sepehri-Amin, S. Hirosawa, and K. Hono, “Advances in Nd-Fe-B based permanent magnets,” in: Handbook of magnetic materials, 27, 269-372 (2018). https://doi.org/10.1016/bs.hmm.2018.08.003
O. Gutfleisch, M.A. Willard, E. Brück, C.H. Chen, S.G. Sankar, and J.P. Liu, “Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient,” Advanced materials. 23(7), 821-842 (2011). https://doi.org/10.1002/adma.201002180
S. Mandal, M. Debata, P. Sengupta, and S. Basu, “L_10 FeNi: a promising material for next generation permanent magnets,” Critical Reviews in Solid State and Materials Sciences, 48(6), 703-725 (2023). https://doi.org/10.1080/10408436.2022.2107484
T.Y. Tashiro, M. Mizuguchi, T. Kojima, T. Koganezawa, M. Kotsugi, T. Ohtsuki, and K. Takanashi, “Structural and magnetic properties of FeNi thin films fabricated on amorphous substrates,” Journal of Applied Physics, 117(17), 17E309 (2015). https://doi.org/10.1063/1.4913935
S. Mandal, A. Panigrahi, A. Rath, M. Bönisch, P. Sengupta, M. Debata, and S. Basu, “Formation of 〖L1〗_0 Ordering in FeNi by Mechanical Alloying and Field-Assisted Heat Treatment: Synchrotron XRD Studies,” Acs Omega, 8(15), 13690-13701 (2023). https://doi.org/10.1021/acsomega.2c07869
E.R. Scott, “Iron meteorites: Composition, age, and origin,” in: Oxford Research Encyclopedia of Planetary Science, (2020).
N. Meftah, S. Mostefaoui, A. Jambon, E.H. Guedda, and S. Pont, “Minor and trace element concentrations in adjacent kamacite and taenite in the Krymka chondrite,” Meteorit. Planet. Sci. 51(4), 696-717 (2016). https://doi.org/10.1111/maps.12617
N. Maât, I. McDonald, R. Barua, B. Lejeune, X. Zhang, G.M. Stephen, A. Fisher, et al., “Creating, probing and confirming tetragonality in bulk FeNi alloys,” Acta Materialia, 196, 776-789 (2020). https://doi.org/10.1016/j.actamat.2020.07.019
Y. Miura, S. Ozaki, Y. Kuwahara, M. Tsujikawa, K. Abe, and M. Shirai, “The origin of perpendicular magneto-crystalline anisotropy in L_10–FeNi under tetragonal distortion,” Journal of physics: Condensed matter, 25(10), 106005 (2013), https://doi.org/10.1088/0953-8984/25/10/106005
I.Z. Hlova, O. Dolotko, M. Abramchuk, A. Biswas, Y. Mudryk, and V.K. Pecharsky, “Enhancement of hard magnetism and chemical order of synthetic L_10-FeNi,” J. Alloys Compd. 981, 173619 (2024). https://doi.org/10.1016/j.jallcom.2024.173619
S. Mandal, A. Panigrahi, A. Rath, M. Bönisch, P. Sengupta, M. Debata, and S. Basu, “Formation of 〖L1〗_0 Ordering in FeNi by Mechanical Alloying and Field-Assisted Heat Treatment: Synchrotron XRD Studies,” Acs Omega, 8(15), 13690-13701 (2023). https://doi.org/10.1021/acsomega.2c07869
F. Meneses, A. Pedernera, C. Blanco, N. Bajales, S.E. Urreta, and P.G. Bercoff, “〖L1〗_0-FeNi ordered phase in AC electrodeposited iron-nickel biphasic nanowires,” Journal of Alloys and Compounds, 766, 373-381 (2018). https://doi.org/10.1016/j.jallcom.2018.06.307
M. Ali, and F. Ahmad, “A review of processing techniques for Fe-Ni soft magnetic materials,” Materials and Manufacturing Processes, 34(14), 1580-1604 (2019). https://doi.org/10.1080/10426914.2019.1662038
P. Rani, J. Thakur, A. Taya, and M.K. Kashyap, “Magnetocrystalline anisotropy of Pt-doped 〖L1〗_0-FeNi compound for clean energy applications,” Vacuum, 159, 186-190 (2019). https://doi.org/10.1016/j.vacuum.2018.10.023
P. Manchanda, R. Skomski, N. Bordeaux, L.H. Lewis, and A. Kashyap, “Transitionmetal and metalloid substitutions in 〖L1〗_0-ordered FeNi,” J. Appl. Phys. 115, 17A710 (2014). https://doi.org/10.1063/1.4862722
P. Rani, R. Singla, J. Thakur, A.H. Reshak, and M.K. Kashyap, “Enhancement in magnetic parameters of 〖L1〗_0-FeNi on Pd-substitution for permanent magnets,” Indian J. Phys. 97, 67–72 (2023). https://doi.org/10.1007/s12648-021-02221-y
P. Blaha, K. Schwarz, G.K.H. Madsen, D. Kvasnicka, J. Luitz, R. Laskowski, F. Tran, and L.D. Marks, WIEN2k an Augmented Plane Wave þ Local Orbitals Program for Calculating Crystal Properties, Revised Edition WIEN2k, 19.1, (Vienna University of Technology, Vienna, Austria, 2019).
M. Weinert, E. Wimmer, and A.J. Freeman, “Total-energy all-electron density functional method for bulk solids and surfaces,” Phys. Rev. B, 26, 4571 (1982). https://doi.org/10.1103/PhysRevB.26.4571
J.P. Perdew, K. Burke, and M. Ernzerhof, “Generalized gradient approximation made simple,” Phys. Rev. Lett. 77, 3865 (1996). https://doi.org/10.1103/PhysRevLett.77.3865
A. Edström, J. Chico, A. Jakobsson, A. Bergman, and J. Rusz, “Electronic structure and magnetic properties of 〖L1〗_0 binary alloys,” Physical Review B, 90(1), 014402 (2014). https://doi.org/10.1103/PhysRevB.90.014402
W. Marks, “Multicriteria optimisation of shape of energy-saving buildings,” Building and environment, 32(4), 331-339 (1997). https://doi.org/10.1016/S0360-1323(96)00065-0
F.D. Murnaghan, “The compressibility of media under extreme pressures,” Proceedings of the National Academy of Sciences, 30(9), 244-247 (1944). https://doi.org/10.1073/pnas.30.9.24
M. Mizuguchi, T. Kojima, M. Kotsugi, T. Koganezawa, K. Osaka, and K. Takanashi, “Artificial fabrication and order parameter estimation of L_10-ordered FeNi thin film grown on a AuNi buffer layer,” Journal of the Magnetics Society of Japan, 35(4), 370 373 (2011). https://doi.org/10.3379/msjmag.1106R008
P. Rani, J. Thakur, A. Taya, and M. K. Kashyap, “Effect of tetragonal distortion induced by interstitial C-doping in 〖L1〗_0-FeNi,” AIP Conference Proceedings, 2115(1), 030497 (2019). https://doi.org/10.1063/1.5113336
E. Poirier, F.E. Pinkerton, R. Kubic, R.K. Mishra, N. Bordeaux, A. Mubarok, L.H. Lewis, et al., “Intrinsic magnetic properties of L10 FeNi obtained from meteorite NWA 6259,” Appl. Phys. 117, 17E318 (2015). https://doi.org/10.1063/1.4916190
Copyright (c) 2024 Zineb Zine, Nassima Meftah
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).