Enhancing Si Solar Cells Efficiency by Adding SiO2 / TiO2 Thin Films Using Transfer Matrix Method

  • Wedad Ahmed Abdullah Garhoom Department of Physics, Faculty of Education/Saber, University of Aden, Yemen
  • Zina Al Shadidi University of Aden
Keywords: SiO2, TiO2, TMM, Efficiency, Optical Properties, Thin Film, Matlab.

Abstract

Thin film silicon solar cells are nowadays the best choice to get electricity due to their low cost compared to the crystalline solar cells. However, thin film silicon solar cells have weak absorption of incident light. To deal with such a weakness and get better efficiency of these cells, an efficient back reflector composed of multilayer thin films (Silver, Silicon dioxide (SiO2) and Titanium dioxide (TiO2)) will be used. The transmitted light from the first silicon layer will be reflected by the next layer, and the reflected light will go back to the first silicon layer. By this way, the absorbance of the silicon solar cell can be increased by an increase in the probability of the light reflection from the SiO2, TiO2 and Ag. The transfer matrix method (TMM) by Matlab program will be used to analyze the results of the reflectance, transmittance and absorbance of the thin film layer and these results can prove the efficiency of the cells by using MATLAB codes.

Downloads

Download data is not yet available.

References

N. Ahmed, Doctorate Thesis Malaysia, Design and Experimental Studies of Multilayer Coating for Application Gallium Nitraide Light Emitting Devices, University Sains Malaysia, 2006.

Z. Alshadidi, and A. Falih, American Journal of Materials Synthesis and Processing, 4(2), 75 (2019), https://doi.org/10.11648/j.ajmsp.20190402.14

G. Burkhard, E. Hoke, and M. McGhee, Adv. Mater, 22, 3293 (2010), https://doi.org/10.1002/adma.201000883

O. Heavens, (1954). Optical Properties of Thin Solid Films. (Dover Publications, USA, 1954).

M. Kolle, Photonic Structures Inspired by Nature, (Springer Verlag, Berlin Heidelberg, 2011).

H. Macleod, Thin-Film Optical Filters. (Taylor & Francis Group, USA, 2010).

E. Perez, Design, Fabrication and Characterization of Porous Silicon Multilayer Optical Devices. (Universtat Rovira I Virgili, 2007).

N. Sahouane, and A. Zerga, Energy Procedia, 44, 118 (2014), https://doi.org/10.1016/j.egypro.2013.12.017

S. Saravanan, R. Dubey, S. Kalainathan, M. More, and D. Gautam, AIP Advances, 5, 057160 (2015), https://doi.org/https://doi.org/10.1063/1.4921944

X. Sheng, S. Johnson, L. Broderick, J. Michel, and L. Kimerling, Applied Physics Letters, 100, 111110 (2012), https://doi.org/10.1063/1.3693613

Y. Xu, W. Chen, X. Ding, X. Pan, L. Hu, S. Yang, J. Zhu, and S. Dai, Inorganic Chemistry Frontiers, 5, 1370 (2018), https://doi.org/10.1039/C8QI00076J

C. Yang, S. Lien, C. Chu, C. Kung, T. Cheng, and P. Chen, International Journal of Photoenergy, 2013, Article ID 2325, (2013), https://doi.org/10.1155/2013/823254

Published
2021-12-10
Cited
How to Cite
Garhoom, W. A. A., & Al Shadidi, Z. (2021). Enhancing Si Solar Cells Efficiency by Adding SiO2 / TiO2 Thin Films Using Transfer Matrix Method. East European Journal of Physics, (4), 164-171. https://doi.org/10.26565/2312-4334-2021-4-22