Use of Silicon Dioxide Encapsulation Method for Restoration of Oil-Polluted Soils
DOI:
https://doi.org/10.26565/1992-4259-2020-23-05Keywords:
oil products, soil, hydrocarbons, silicon dioxide, encapsulationAbstract
Purpose. Approbation of the method of encapsulation of silicon dioxide to restore the biological value of oil-contaminated soil.
Methods. The encapsulating solution was prepared using sodium silicate (7% w. / vol.) as the main component and a synthetic surfactant (sodium dodecyl sulfate). To restore the contaminated soil, a treatment solution ratio of 1:1, 1:2, 1:3 and 1:4 was used for sodium silicate and sodium dodecyl sulfate, respectively. Phytotoxicity of oil-contaminated soil was determined by biotesting aqueous extracts from the soil.
Results. The most optimized for use from the studied ratios of substances is a solution consisting of 2 parts: sodium silicate and sodium dodecyl sulfate. The lowest phytotoxic effect (17%) was recorded at pH of 5 of the treated soil and the ratio of solution components 1:2 (sodium silicate / sodium dodecyl sulfate). In the experiments, 2 species of monocotyledons (oats, corn) and 2 species of dicotyledonous plants (lettuce, black radish) were used.
Conclusions. The technology of encapsulation of silicon dioxide in the treatment of oil-contaminated soils with a solution of sodium silicate and sodium dodecyl sulfate is quite economically attractive. The material formed as a result of the encapsulation process dries, forming an amorphous silica material, within which, in our opinion, hydrocarbons and heavy metals accumulate, but further research is needed for such a statement.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication of this work under the terms of a license Creative Commons Attribution License 4.0 International (CC BY 4.0).
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
