Analysis of drug release models from biodegradable nanomodified chitosan based materials
Abstract
Background: The problem of drug delivery to the tissue-damaged area of the human body remains relevant. Hydroxyapatite (HA), as one of the best known calcium phosphate (CaP) compounds, is used as an inorganic component of composite materials for drug loading. The organic components in composite materials are biopolymers such as alginate, agarose, chitosan (CS), collagen, and gelatin. Selected C60 nanoparticles are widely used as antibacterial agents and can strengthen the structure of composites. Microwave (MW) irradiation is an exposure method that shortens the synthesis time by significantly increasing the number of nucleation centers, which results the reducing the size of the crystallites formed, which affects the adsorption capacity of the product.
Objectives: Most forms of drug delivery systems demonstrate rapid release of ceftriaxone (CFT) and anasthesin (ANA) within 2 days, characterized by a "burst release" that may cause overdose in the first hours of use. The aim of this work was to investigate and compare the drug release kinetics from convectionally and MW-synthesized CS matrices modified with HA, multiphasic CaP, and fullerene C60 nanoparticles for long-term bone tissue regeneration.
Materials and methods: The study was performed by high-performance liquid chromatography (HPLC) using an Agilent 1200 device with a DAD detector (λ = 210–270 nm) and a C18 chromatographic column (Zorbax SB-C18 4.6×150 mm, 5 μm) at ambient temperature.
Results: HA is a good adsorbent, but a poorly soluble substance, so the pharmacokinetics of ANA release was mainly determined by the degree of adsorption of the drug on the surface of the material and its diffusion potential. CS and C60 in the composition provide a prolonged release of ANA for up to 18 days. The release of CFT from CaP/CS matrices depends on the method of its introduction into the composite - during synthesis or saturation after synthesis. The saturation method is characterized by a fast release range of 24–48 hours, and adding during synthesis delays active release to 48–72 hours (start of degradation). The release index took values from n = 0.56 to n = 0.92, which corresponds to the release kinetics that does not follow Fick's law, and close to the first-order release kinetics model.
Conclusions: Synthesized composites based on a CS matrix modified with nanostructured CaP particles and fullerene C60 are potential carriers of CFT and ANA with the function of their long-term release in areas of bone tissue injury.
Downloads
References
Liu Z-L, Jia Q-Y, Li X-D, Li S-P, Shen J, Lin J, et al. Synthesis of hollow mesoporous HAp-Au/MTX and its application in drug delivery. Colloids Surf A Physicochem Eng Asp. 2020;586:124231. https://doi.org/10.1016/j.colsurfa.2019.124231
Fosca M, Rau J V., Uskoković V. Factors influencing the drug release from calcium phosphate cements. Bioact Mater. 2022;7:341–63. https://doi.org/10.1016/j.bioactmat.2021.05.032
Sukhodub LB, Kumeda MA, Sukhodub LF, Prylutskyy YI. Fullerene C60-containing hydroxyapatite/polymer polyelectrolyte composite for dental applications. In: Pogrebnjak, A., Pogorielov, M., Viter, R. (eds) Nanomaterials in Biomedical Application and Biosensors (NAP-2019). Springer Proceedings in Physics. Vol. 244. Springer, Singapore; 2020. p. 129–37. https://doi.org/10.1007/978-981-15-3996-1_13
Lahiri D, Ghosh S, Agarwal A. Carbon nanotube reinforced hydroxyapatite composite for orthopedic application: A review. Materials Science and Engineering: C. 2012;32:1727–58. https://doi.org/10.1016/j.msec.2012.05.010
Fortner JD, Lyon DY, Sayes CM, Boyd AM, Falkner JC, Hotze EM, et al. C60 in water: Nanocrystal formation and microbial response. Environ Sci Technol. 2005;39:307–16. https://doi.org/10.1021/es048099n
Grebinyk A, Grebinyk S, Prylutska S, Ritter U, Matyshevska O, Dandekar T, et al. C60 fullerene accumulation in human leukemic cells and perspectives of LED-mediated photodynamic therapy. Free Radic Biol Med. 2018;124:319–27. https://doi.org/10.1016/j.freeradbiomed.2018.06.022
Lyon DY, Adams LK, Falkner JC, Alvarez PJJ. Antibacterial Activity of Fullerene Water Suspensions: Effects of Preparation Method and Particle Size. Environ Sci Technol. 2006;40:4360–6. https://doi.org/10.1021/es0603655
Zarrintaj P, Seidi F, Youssefi Azarfam M, Khodadadi Yazdi M, Erfani A, Barani M, et al. Biopolymer-based composites for tissue engineering applications: A basis for future opportunities. Compos B Eng. 2023;258:110701. https://doi.org/10.1016/j.compositesb.2023.110701
Krishnaswami V, Rajan E, Dutta G, Muruganantham S, Sugumaran A, SA JR. Chitosan mediated smart photodynamic therapy based novel drug delivery systems- a futuristic view. Carbohydr Polym Technol Appl. 2024;7:100510. https://doi.org/10.1016/j.carpta.2024.100510
Hwang S-J, Lee J-S, Ryu T-K, Kang R-H, Jeong K-Y, Jun D-R, et al. Alendronate-modified hydroxyapatite nanoparticles for bone-specific dual delivery of drug and bone mineral. Macromol Res. 2016;24:623–8. https://doi.org/10.1007/s13233-016-4094-5
Soares F, Ribeiro N, Baião A, Torres PMC, Sarmento B, Olhero SM. Sustained drug release from sintering-free calcium phosphate-based scaffolds. J Drug Deliv Sci Technol. 2023;88:04906. https://doi.org/10.1016/j.jddst.2023.104906
Duceac LD, Luca AC, Mitrea G, Banu EA, Ciuhodaru MI, Ciomaga I, et al. Ceftriaxone intercalated nanostructures used to improve medical treatment. Materiale Plastice. 2018;55(4):613–5. https://doi.org/10.37358/mp.18.4.5086
Shrimali JD, Patel H V., Gumber MR, Kute VB, Shah PR, Vanikar A V., et al. Ceftriaxone induced immune hemolytic anemia with disseminated intravascular coagulation. Indian Journal of Critical Care Medicine 2013;17. https://doi.org/10.4103/0972-5229.123465
Hossein abadi AR, Farhadian N, Karimi M, Porozan S. Ceftriaxone sodium loaded onto polymer-lipid hybrid nanoparticles enhances antibacterial effect on gram-negative and gram-positive bacteria: Effects of lipid - polymer ratio on particles size, characteristics, in vitro drug release and antibacterial drug efficacy. J Drug Deliv Sci Technol. 2021;63:102457. https://doi.org/10.1016/j.jddst.2021.102457
Singh B, Dhiman A, Kumar S. Polysaccharide gum based network hydrogels for controlled drug delivery of ceftriaxone: Synthesis, characterization and biomedical evaluations. Results Chem. 2023;5:100695. https://doi.org/10.1016/j.rechem.2022.100695
Raza MA, Gull N, Lee SW, Seralathan KK, Park SH. Development of stimuli-responsive chitosan based hydrogels with anticancer efficacy, enhanced antibacterial characteristics, and applications for controlled release of benzocaine. J Ind Eng Chem. 2022;109:210–20. https://doi.org/10.1016/j.jiec.2022.02.004
Ritter U, Prylutskyy YI, Evstigneev MP, Davidenko NA, Cherepanov VV, Senenko AI, et al. Structural features of highly stable reproducible C60 fullerene aqueous colloid solution probed by various techniques. Fullerenes Nanotubes Carbon Nanostruct. 2015;23:530–34. https://doi.org/10.1080/1536383X.2013.870900
Sukhodub LB, Sukhodub LF, Kumeda MO, Prylutska SV, Deineka V, Prylutskyy YI, et al. C60 fullerene loaded hydroxyapatite-chitosan beads as a promising system for prolonged drug release. Carbohydr Polym. 2019;223:115067. https://doi.org/10.1016/j.carbpol.2019.115067
Sukhodub L, Kumeda M, Sukhodub L, Strelchuk V, Nasieka I, Vovchenko L, et al. Hybrid composite based on chitosan matrix mineralized by polyphasic calcium orthophosphates with enhanced bioactivity and protein adsorption capacity. Mater Today Commun. 2022;31:103696. https://doi.org/10.1016/j.mtcomm.2022.103696
Sukhodub LB, Sukhodub LF, Kumeda MO, Prylutskyy YI, Pogorielov M V., Evstigneev MP, et al. Single-walled carbon nanotubes loaded hydroxyapatite–alginate beads with enhanced mechanical properties and sustained drug release ability. Prog Biomater. 2020;9:1–14. https://doi.org/10.1007/s40204-020-00127-2
Korsmeyer RW, Gurny R, Doelker E, Buri P, Peppas NA. Mechanisms of solute release from porous hydrophilic polymers. Int J Pharm. 1983;15:25–35. https://doi.org/10.1016/0378-5173(83)90064-9
Huang X, Brazel CS. On the importance and mechanisms of burst release in matrix-controlled drug delivery systems. J Controlled Release. 2001;73:121–36. https://doi.org/10.1016/S0168-3659(01)00248-6
Dash S, Murthy PN, Nath L, Chowdhury P. Kinetic modeling on drug release from controlled drug delivery systems. Acta Pol Pharm. 2010;67(3):217–23.
Copyright (c) 2024 M. O. Kumeda, L. B. Sukhodub, L. F. Sukhodub
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
