Deposition of calcium hydroxyapatite coatings by dipping method on ti-6al- 4v alloy used for medical implants
Keywords:
hydroxyapatite, coatings, Ti-6Al-4V, medical implant, bioactivity, osteointegration, dip coating method
Abstract
To achieve better biocompatibility with living tissues metal implants made of Ti-6Al-4V are often coated by calcium hydroxyapatite. Deposition techniques of calcium hydroxyapatite coatings using dipping method on metal implants almost not used. This paper presents new dipping-solution compounds used for deposition of hydroxyapatite on Ti-6Al-4V alloy. Scanning electron microscopy and X-ray diffractometry have been used to study morphology, element and phase structure
Downloads
Download data is not yet available.
References
1. Оперативное лечение кист челюстей с использованием гидроксиапатита ультравысокой дисперсности / В. М. Безруков, Л. А. Григорянц, В. П. Зуев, А. С. Панкратов // Стоматология. – 1998. – №1. – С. 31–35. /Operativnoe lechenie kist cheljustej s ispol'zovaniem gidroksiapatita ul'travysokoj dispersnosti / V. M. Bezrukov, L. A. Grigor'janc, V. P. Zuev, A. S. Pankratov // Stomatologija. – 1998. – №1. – S. 31–35./
2. Белякова Е. Г. Технология гидроксиапатита кальция – стимулятора остеосинтеза: Дис. на соискание степени канд. техн. наук 05.17.01. Екатеринбург, 2002. /Beljakova E.G. Tehnologija gidroksiapatita kal'cija – stimuljatora osteosinteza: Dis. na soiskanie stepe-ni kand. tehn. nauk 05.17.01. Ekaterinburg, 2002./
3. Liu D. M. In vitro forming of calcium phosphate layer on sol-gel hydroxyapatite-coated metal substrates / D. M. Liu, Q. Yang, T. Troszynski // J. Mater. Sci : Mater.Med. – 2002. – V. 13. № 10 – P.965–972.
4. Investigation of the Dissolution of the Bioceramic Hydroxyapatite in the Presence of Titanium Ions using ToF-SIMS and XPS / S. R. Leadley, M. C. Davies, C. C. Ribeiro [et al.] // Biomaterials. – 1997. – V. 18. – P. 311–16.
5. Lange G. L. Interface between Bone Tissue and Implants of Hydroxyapatite or Hydroxyapatite-coated Titanium Implants / G. L. Lange, K. Donath // Biomaterials. – 1989. – V. 10. – P. 121–25.
6. Filiaggi M. J. Post-plasma-spraying Heat Treatment of the HA Coating/Ti-6Al-4V Implant System / M. J. Filiaggi, R. M. Pilliar, N. A. Coombs // J. Biomed. Mater. Res. – 1993. – V. 27. – P. 191–98.
7. Water Vapour- treated Hydroxyapatite Coatings after Plasma Spraying and Their Characteristics / Y. Cao, J. Weng, J. Chen [et al.] // Biomaterials. – 1996. – V. 17. – P. 419 –24.
8. In Vitro and In Vivo Mechanical Evaluations of Plasma-sprayed Hydroxyapatite Coatings on Titanium Implants: The Effect of Coating Characteristics / C. Y. Yang, R. M. Lin, B. C. Wang [et al.] // J. Biomed. Mater. Res. – 1997. – V. 37 – P. 335–45.
9. Bone Tissue Reactions to an Electrophoretically Applied Calcium Phosphate Coating / M. Gottlander, C. B. Johansson, A. Wennerberg [et al.] // Biomaterials. – 1997. – V. 18. – P. 551–57.
10. Influence of Rapid Heating with Infrared Radiation on RF Magnetron-sputtered Calcium Phosphate Coatings / M. Yoshinari, T. Hayakawa, J. G. C. Wolke [et al.] // J. Biomed. Mater. Res. – 1997. – V. 37. – P. 60– 67.
11. Synthetic Implant Surfaces; 1. The Formation and Characterization of Sol–Gel Titania Films / D. B. Haddow, S. Kothari, P. F. James [et al.] // Biomaterials. – 1996. – V. 17. – P. 501–507.
12. Haddow D. B. Characterization of Sol–Gel Surfaces for Biomedical Applications / D. B. Haddow, P. F. James, and R. V. Noort // J. Mater. Sci. Mater. Med. – 1996. – V. 7. – P. 255–60.
13. Weng W. Alkoxide Route for Preparing Hydroxyapatite and Its Coatings / W. Weng and J. L. Baptista // Biomaterials. – V. 19. – P. 125–31.
14. Bioactive Coatings of Glass-Ceramics on Metals / J. Carsten, P. Wange, G. Grimm [et al.] // Glass Sci. Technol. – 1995. – V. 68. – P. 117–22.
15. Breme J. Development of a Titanium Alloy Suitable for an Optimised Coating with Hydroxyapatite / J. Breme, Y. Zhou, and L. Groh // Biomaterials. – 1995. – V. 16. – P. 239–44.
16. L. Tuantuan, J. Lee, T. Kobayashi, and H. Aoki, “Hydroxyapatite Coating by Dipping Method, and Bone Bonding Strength / L. Tuantuan, J. Lee, T. Kobayashi, H. Aoki // J. Mater. Sci.: Mater. Med. – 1996. – V. 7. – P. 355–57.
17. Weng W. Preparation and Characterization of Hydroxyapatite Coatings on Ti6Al4V Alloy by a Sol–Gel Method / W. Weng, J. L. Baptista // J. Am. Ceram. Soc. – 1999. – V. 82 [1]. – P. 27–32.
18. Руководство по неорганическому синтезу / под ред. Г. Брауера. – М.: Мир. – 1985. – Т.2. – 657 с. /Rukovodstvo po neorganicheskomu sintezu :/ pod. red. G. Brauera. – М.: Мir. – 1985. – Т. 2. – 657 s./
19. Сафронова Т.В., Шехирев М.А., Путляев В.И., Третяков Ю.Д. Керамические материалы на основе гидроксиапатита, полученные из растворов различной концентрации // Неорганические материалы. – 2007. – Т. 43. – № 8. – С. 1005–1014. /Safronova Т.V., Shehirev М.А., Putlyaev V.I., Tretyakov Yu.D. Кеramicheskie materiali na osnove gidroksiapatita, poluchennie iz rasvorov razlichnoy koncentracii // Neorganicheskie materiali. – 2007. – Т. 43. – № 8. – S. 1005–1014./
20. Blast Coating Method: New Method of Coating Titanium Surface with Hydroxyapatite at Room Temperature / K. Ishikawa, Y. Miyamoto, M. Nagayama, K. Asaoka // J. Biomed. Mater. Res. – 1997. – V. 38. – P. 129–34.
21. Microcrystalline Hydroxyapatite Formation from Alkaline Solutions / S. Lazic // J. Cryst. Growth. – 1995. – V. 147. – P. 147–54.
2. Белякова Е. Г. Технология гидроксиапатита кальция – стимулятора остеосинтеза: Дис. на соискание степени канд. техн. наук 05.17.01. Екатеринбург, 2002. /Beljakova E.G. Tehnologija gidroksiapatita kal'cija – stimuljatora osteosinteza: Dis. na soiskanie stepe-ni kand. tehn. nauk 05.17.01. Ekaterinburg, 2002./
3. Liu D. M. In vitro forming of calcium phosphate layer on sol-gel hydroxyapatite-coated metal substrates / D. M. Liu, Q. Yang, T. Troszynski // J. Mater. Sci : Mater.Med. – 2002. – V. 13. № 10 – P.965–972.
4. Investigation of the Dissolution of the Bioceramic Hydroxyapatite in the Presence of Titanium Ions using ToF-SIMS and XPS / S. R. Leadley, M. C. Davies, C. C. Ribeiro [et al.] // Biomaterials. – 1997. – V. 18. – P. 311–16.
5. Lange G. L. Interface between Bone Tissue and Implants of Hydroxyapatite or Hydroxyapatite-coated Titanium Implants / G. L. Lange, K. Donath // Biomaterials. – 1989. – V. 10. – P. 121–25.
6. Filiaggi M. J. Post-plasma-spraying Heat Treatment of the HA Coating/Ti-6Al-4V Implant System / M. J. Filiaggi, R. M. Pilliar, N. A. Coombs // J. Biomed. Mater. Res. – 1993. – V. 27. – P. 191–98.
7. Water Vapour- treated Hydroxyapatite Coatings after Plasma Spraying and Their Characteristics / Y. Cao, J. Weng, J. Chen [et al.] // Biomaterials. – 1996. – V. 17. – P. 419 –24.
8. In Vitro and In Vivo Mechanical Evaluations of Plasma-sprayed Hydroxyapatite Coatings on Titanium Implants: The Effect of Coating Characteristics / C. Y. Yang, R. M. Lin, B. C. Wang [et al.] // J. Biomed. Mater. Res. – 1997. – V. 37 – P. 335–45.
9. Bone Tissue Reactions to an Electrophoretically Applied Calcium Phosphate Coating / M. Gottlander, C. B. Johansson, A. Wennerberg [et al.] // Biomaterials. – 1997. – V. 18. – P. 551–57.
10. Influence of Rapid Heating with Infrared Radiation on RF Magnetron-sputtered Calcium Phosphate Coatings / M. Yoshinari, T. Hayakawa, J. G. C. Wolke [et al.] // J. Biomed. Mater. Res. – 1997. – V. 37. – P. 60– 67.
11. Synthetic Implant Surfaces; 1. The Formation and Characterization of Sol–Gel Titania Films / D. B. Haddow, S. Kothari, P. F. James [et al.] // Biomaterials. – 1996. – V. 17. – P. 501–507.
12. Haddow D. B. Characterization of Sol–Gel Surfaces for Biomedical Applications / D. B. Haddow, P. F. James, and R. V. Noort // J. Mater. Sci. Mater. Med. – 1996. – V. 7. – P. 255–60.
13. Weng W. Alkoxide Route for Preparing Hydroxyapatite and Its Coatings / W. Weng and J. L. Baptista // Biomaterials. – V. 19. – P. 125–31.
14. Bioactive Coatings of Glass-Ceramics on Metals / J. Carsten, P. Wange, G. Grimm [et al.] // Glass Sci. Technol. – 1995. – V. 68. – P. 117–22.
15. Breme J. Development of a Titanium Alloy Suitable for an Optimised Coating with Hydroxyapatite / J. Breme, Y. Zhou, and L. Groh // Biomaterials. – 1995. – V. 16. – P. 239–44.
16. L. Tuantuan, J. Lee, T. Kobayashi, and H. Aoki, “Hydroxyapatite Coating by Dipping Method, and Bone Bonding Strength / L. Tuantuan, J. Lee, T. Kobayashi, H. Aoki // J. Mater. Sci.: Mater. Med. – 1996. – V. 7. – P. 355–57.
17. Weng W. Preparation and Characterization of Hydroxyapatite Coatings on Ti6Al4V Alloy by a Sol–Gel Method / W. Weng, J. L. Baptista // J. Am. Ceram. Soc. – 1999. – V. 82 [1]. – P. 27–32.
18. Руководство по неорганическому синтезу / под ред. Г. Брауера. – М.: Мир. – 1985. – Т.2. – 657 с. /Rukovodstvo po neorganicheskomu sintezu :/ pod. red. G. Brauera. – М.: Мir. – 1985. – Т. 2. – 657 s./
19. Сафронова Т.В., Шехирев М.А., Путляев В.И., Третяков Ю.Д. Керамические материалы на основе гидроксиапатита, полученные из растворов различной концентрации // Неорганические материалы. – 2007. – Т. 43. – № 8. – С. 1005–1014. /Safronova Т.V., Shehirev М.А., Putlyaev V.I., Tretyakov Yu.D. Кеramicheskie materiali na osnove gidroksiapatita, poluchennie iz rasvorov razlichnoy koncentracii // Neorganicheskie materiali. – 2007. – Т. 43. – № 8. – S. 1005–1014./
20. Blast Coating Method: New Method of Coating Titanium Surface with Hydroxyapatite at Room Temperature / K. Ishikawa, Y. Miyamoto, M. Nagayama, K. Asaoka // J. Biomed. Mater. Res. – 1997. – V. 38. – P. 129–34.
21. Microcrystalline Hydroxyapatite Formation from Alkaline Solutions / S. Lazic // J. Cryst. Growth. – 1995. – V. 147. – P. 147–54.
Cited
How to Cite
Chubukin, A. S. (1). Deposition of calcium hydroxyapatite coatings by dipping method on ti-6al- 4v alloy used for medical implants. Biophysical Bulletin, 1(29). Retrieved from https://periodicals.karazin.ua/biophysvisnyk/article/view/2370
Section
Methods of biophysical investigations
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
