Finite Element Modeling of Scanning Speed Effects in Femtosecond Laser-Induced Graphene Fabrication

  • J.O. Sadullayev Department of Electrical Engineering and Power Engineering, Urgench State University named after Abu Raykhan Beruni, Urgench, Uzbekistan https://orcid.org/0000-0002-5577-2644
  • M.M. Akhmedov Department of Electrical Engineering and Power Engineering, Urgench State University named after Abu Raykhan Beruni, Urgench, Uzbekistan https://orcid.org/0000-0003-1208-1736
  • M.E. Vapayev Department of Electrical Engineering and Power Engineering, Urgench State University named after Abu Raykhan Beruni, Urgench, Uzbekistan https://orcid.org/0009-0007-5194-131X
  • A.E. Rajabov Department of Electrical Engineering and Power Engineering, Urgench State University named after Abu Raykhan Beruni, Urgench, Uzbekistan https://orcid.org/0000-0003-1687-2113
  • I.Y. Davletov Department of Electrical Engineering and Power Engineering, Urgench State University named after Abu Raykhan Beruni, Urgench, Uzbekistan https://orcid.org/0009-0006-5971-7649
  • G.S. Boltaev Department of Physics, American University of Sharjah, Sharjah, United Arab Emirates https://orcid.org/0000-0003-0354-1251
Keywords: Laser-induced graphene, Polyimide, Scanning speed, Ultrafast heat transfer, Moving Gaussian heat source, Finite element modeling, Temperature distribution, Graphitization window

Abstract

Laser-induced graphene (LIG) enables mask free direct writing of conductive carbon structures on polyimide substrates for flexible electronic and sensing applications. In femtosecond laser-induced graphene (FLIG), the scanning speed strongly affects the local temperature field, and thus the extent and quality of graphitization, but this dependence is still not fully quantified. In this study, a time dependent finite element model is implemented in COMSOL Multiphysics to resolve the temperature distribution generated by a femtosecond laser beam on a polyimide surface as a function of scanning speed. The laser is described as a moving Gaussian surface heat source, and the transient heat conduction equation is solved to capture ultrafast heating and cooling during a pulse train. Simulations for scan speeds between 0.05 and 0.20 m/s show that decreasing the speed increases the peak temperature and enlarges the heat affected zone, whereas higher speeds reduce both quantities. By comparison of the predicted peak temperatures with the graphitization thresholds in the literature for polyimide derived graphene, an intermediate scan speed window is identified in which the thermal budget is sufficient for graphene formation while avoiding excessive overheating and damage. This modeling framework provides a practical tool for pre selecting femtosecond laser parameters and for accelerating the optimization of FLIG processes for flexible graphene based devices.

Downloads

Download data is not yet available.

References

S. P. Lee, H. Kim, and J. Park, “A review on laser-induced graphene in flexible energy storage and conversion devices,” Chem. Eng. J. 499, 156110 (2024). https://doi.org/10.1016/j.cej.2024.156110.

J. Yang, J. Yu, K. Zhang, F. Qiao, and G. Yu, ”Laser-Induced Graphene Toward Flexible Energy Harvesting and Storage Electronics,” Advanced Materials Technologies, 9(22), 2301602 (2024). https://doi.org/10.1002/admt.202301602

M. R. Bedilov, Kh. B. Beisembaeva, and I. Yu. Davletov, ”Formation of the spectra of multiply charged ions from the plasma of Nddoped glass irradiated with a neodymium laser,” Technical Physics, 47(8), 1019–1023 (2002). https://doi.org/10.1134/1.1501684

Bedilov, M. R., Davletov, I.Y., Sabitov, M. S., Berdierov, G. R., Tsoi, T. G., ”Multiply charged ion spectra of a laser plasma produced on both sides of the target,” Quantum Electronics, 31(5), 453 (2001). https://doi.org/10.1070/QE2001v031n05ABEH001977

M. R. Bedilov, R. T. Khaidarov, B. K. Yakubov, and U. S. Kunishev, ”Charge and energy spectra of multiply charged ions of a two-element laser plasma formed from targets of different densities,” Quantum Electronics, 26(9), 814 (1996). https://doi.org/10.1070/QE1996v026n09ABEH000788

M. S. Isaev, U. T. Asatov, M. A. Tulametov, S. R. Kodirov, and A. E. Rajabov, ”Study of the Inhomogeneities of Overcompensated Silicon Samples Doped with Manganese,” East European Journal of Physics, (2), 341–344 (2024). https://doi.org/10.26565/2312-4334-2024-2-40

J. S. Abdullayev, J. S. Abdullayev, I. B. Sapaev, J. I. Razzokov, D. A. Juraev, E. E. Elsayed, ”Modeling of Optoelectronic Properties in p-Si/n-CdmZn1-mS Heterojunctions: Effects of Composition and Temperature,” Journal of Electronic Materials, 54, 11607–11617 (2025). https://doi.org/10.1007/s11664-025-12480-8

A. T. Mamadalimov, M. S. Isaev, M. N. Mamatkulov, S. R. Kodirov, and J. T. Abdurazzokov, ”Study of Silicide Formation in Large-Diameter Monocrystalline Silicon,” East European Journal of Physics, (2), 366–371 (2024). https://doi.org/10.26565/2312-4334-2024-2-45

M. S. Isaev, A. I. Khudayberdieva, M. N. Mamatkulov, U. T. Asatov, and S. R. Kodirov, ”The Surface Layer Morphology of Si⟨Cr⟩ Samples,” East European Journal of Physics, (4), 297–300 (2024). https://doi.org/10.26565/2312-4334-2024-4-32

H. Wang, Z. Zhao, P. Liu, and X. Guo, ”Laser-Induced Graphene Based Flexible Electronic Devices,” Biosensors, 12(2), 55 (2022). https://doi.org/10.3390/bios12020055

C. Francis, A. Rektor, T. Valayil-Varghese, N. McKibben, I. Estrada, J. Forbey, and D. Estrada, “Laser-induced graphene gas sensors for environmental monitoring,” Front. Chem. 12, (2024). https://doi.org/10.3389/fchem.2024.1448205

T. Han, A. Nag, R.B.V.B. Simorangkir, N. Afsarimanesh, H. Liu, S.C. Mukhopadhyay, and Y. Xu, et al., ”Multifunctional Flexible Sensor Based on Laser-Induced Graphene,” Sensors, 19, 3477 (2019). https://doi.org/10.3390/s19163477

X. Zhao, J. Zhai, Y. Zhou, J. Hu, and L. Wang, “Femtosecond laser-driven synthesis of laser-induced graphene: Optimizing microstructure and electrochemical performance for flexible electrodes,” Journal of Colloid and Interface Science, 703, Part 1 (2026). https://doi.org/10.1016/j.jcis.2025.139061

M. R. Bedilov, I. Yu. Davletov, and Sh. D. Sultanov, ”Charge and energy spectra of fast multicharged ions in a laser plasma,” Plasma Physics Reports, 28(12), 1038–1040 (2002). https://doi.org/10.1134/1.1528235

R.T. Khaydarov, H.B. Beisinbaeva, M.M. Sabitov, Milan Kalal, and G.R. Berdiyorov, ”Conditions defining the mechanisms of the formation of light gas ions in multicomponent laser-produced plasmas,” Nuclear Fusion, 50(10), 105007 (2010). https://doi.org/10.1088/0029-5515/50/10/105007

M. Guan, Z. Zhang,W. Zhu, Y. Gao, S.Wang, and X. Li, “Femtosecond laser-induced graphene for temperature and ultrasensitive flexible strain sensing,” Front. Mater. Sci. 18(3), 240696 (2024). https://doi.org/10.1007/s11706-024-0696-6

R. Murray, M. Burke, D. Iacopino, and A.J. Quinn, “Design of Experiments and Optimization of Laser-Induced Graphene,” ACS Omega, 6(26), 6736–16743 (2021). https://doi.org/10.1021/acsomega.1c00309

G. S. Boltaev, M. Iqbal, S. R. Kamalov, M. Vapaev, I. Y. Davletov, and A. S. Alnaser, ”Impact of plasma conditions on the shape of femtosecond laser-induced surface structures of Ti and Ni,” Applied Physics A, 128(6), 488 (2022). https://doi.org/10.1007/s00339-022-05614-w

B. X. Eshchanov, G. I. Mukhamedov, N. S. Khalilova, B. R. Sobirov, M. Vapaev, G. S.Boltaev, ”Ultrafast laser nanostructured silicon coated with silver nanoparticles for efficient SERS detection of R6G,” Applied Physics A, 132(2), 111 (2026). https://doi.org/10.1007/s00339-025-09179-2

A. I. Japakov, M. E. Vapaev, R. M. Bedilov, Z. T. Azamatov, and I. Y. Davletov, ”Spectra of Multiply Charged Ions in Laser Plasma Formed from Gas-Containing Targets,” East European Journal of Physics, (3), 490-494 (2023). https://doi.org/10.26565/2312-4334-2023-3-55

A. I. Japakov, R. M. Bedilov, J. O. Kamalova, I. Y. Davletov, and A. R. Matnazarov, ”The impact of laser radiation frequency on the formation of the main characteristics of ions in a mono-element laser plasma,” EPJ Web of Conferences, 318, 05002 (2025). https://doi.org/10.1051/epjconf/202531805002

M. E. Vapaev, F. M. Tojinazarov, B. R. Sobirov, S. R. Kamalov, I. Y. Davletov, and G. S. Boltaev, ”Laser fluence-dependent LIPSS formed on the surface of niobium alloys,” EPJ Web of Conferences, 318, 05005 (2025). https://doi.org/10.1051/epjconf/202531805005

M. Akhmedov, J. Sadullayev, M. Vapayev, A. Matnazarov, I. Davletov, and J. Rayimbaev, ”Picosecond-pulsed laser ablation of aluminum foils: crater morphology and plasma parameters,” Engineering Research Express, 7(3), 035362 (2025). https://doi.org/10.1088/2631-8695/ae0092

M. Akhmedov, J. Sadullayev, M. Vapayev, F. Tojinazarov, I. Davletov, and J. Rayimbaev, ”Effects of picosecond pulsed laser radiation on crater formation on copper foil surfaces,” Engineering Research Express, 8, 035401 (2026). https://doi.org/10.1088/2631-8695/ae3b9d

Z. Ruziev, U. Sapaev, H. Eshkuvatov, R. Karimov, I. Egamberdiev, M. Musurmonov, and R. Turniyazov, ”Surface ionization of diamond by femtosecond laser pulses: A comparative study of analytical models,” Results in Optics, 23, 100942 (2026). https://doi.org/10.1016/j.rio.2025.100942

F.F. Franco, M.H. Malik, L. Manjakkal, A. Roshanghias, C.J. Smith, C. Gauchotte-Lindsay, “Optimizing Carbon Structures in Laser-Induced Graphene Electrodes Using Design of Experiments for Enhanced Electrochemical Sensing Characteristics,” ACS Appl. Mater. Interfaces, 16(47), 65489–65502 (2024). https://doi.org/10.1021/acsami.4c13124

COMSOL AB, “Modeling ultrafast heat transfer with COMSOL Multiphysics,” COMSOL Blog, 2026. https://www.comsol.com/blogs/modeling-ultrafast-heat-transfer-with-comsolmph

J. Fernandes, and M.-J. Kim, “Probing ultrafast heat transfer mechanisms in plasmonic gold nanostructures: FEM analysis of core–shell configurations under femtosecond laser irradiation,” Phys. Chem. Chem. Phys. (23), (2025). https://doi.org/10.1039/D5CP00715A

COMSOL AB, “Ultrafast heat transfer due to femtosecond laser heating,” COMSOL Application Gallery, 2025. https://www.comsol.com/model/ultrafast-heat-transfer-due-to-femtosecond-laser-heating-142421

J. S. Abdullayev, L. Abdullayeva, L. Agamalieva, and R. Ismailova, ”Correlating Ni microstructure with Schottky barrier homogeneity in monolayer MoS2 field-effect transistors,” Advanced Physical Research, 7(3), 350–357 (2025). https://doi.org/10.62476/apr.73350

J. S. Abdullayev, and I. B. Sapaev, (2025). Analytic analysis of the features of GaAs/Si radial heterojunctions: Influence of temperature and concentration. East European Journal of Physics, (1), 204–210. https://doi.org/10.26565/2312-4334-2025-1-21

J. S. Abdullayev, I. B. Sapaev, N. Esanmuradova, S. Kadirov, and Sh.M. Kuliyev, ”Mathematical analysis of the features of radial p-n junction: Influence of temperature and concentration,” East European Journal of Physics, (2), 220–225 (2025). https://doi.org/10.26565/2312-4334-2025-2-24

A. Mustafoqulov, R. Baratov, Z. Radjapov, S. Kadirov, and B. Urinov, ”Angular displacement measurement and control sensors of agricultural robot-manipulators,” in: IV International Conference on Agricultural Engineering and Green Infrastructure for Sustainable Development (AEGISD-IV 2024), 105, 03003 (2024). https://doi.org/10.1051/bioconf/202410503003

A. Y. Boboev, N. Y. Yunusaliyev, G. G. Tojiboyev, O. S. Muminov, and S. R. Kadirov, ”SRIM simulation of irradiation damage by protons in ZnO: S compound,” Journal of Ovonic Research, 21(6), 781-788 (2025). https://doi.org/10.15251/JOR.2025.216.781

A. Y. Boboev, U. Karimberdiev, S. Kadirov, and N. Y. Yunusaliyev, ”Growth of Solid Solutions (Ge2)(GaAs1-γ Biδ)x(ZnSe)y on Silicon Substrates by Liquid Phase Epitaxy,” Chalcogenide Letters, 22(11), 951-957 (2025). https://doi.org/10.15251/CL.2025.2211.951

A. T. Mamadalimov, M. S. Isaev, S. R. Kodirov, T. U. Atamirzaev, M. N. Mamatkulov, A. UT, ”Comparative Analysis of the Properties of Manganese Silicide,” J. Nano- Electron. Phys. 17(5), 05011 (2025). https://doi.org/10.21272/jnep.17(5).05011

S. R. U. Qodirov, and I. Y. Davletov, ”Improving thinking and imagining skills in school students by training the physics using simulations,” AIP Conference Proceedings, 3268(1), 060006 (2025). https://doi.org/10.1063/5.0257234

I. Davletov, N. Khakimov, A. Qodirov, M. Akhmedov, J. Sadullayev, and O. Khamraev, ”Soft start of induction electric motors using rezistor and denistor devices,” E3SWeb of Conferences, 461, 01066 (2023). https://doi.org/10.1051/e3sconf/202346101066

I. Y. Davletov, N. Z. Khakimov, A. K. Qodirov, M. M. Akhmedov, J. O. Sadullayev, O. O. Khamraev, ”Increasing the Efficiency of Asynchronous Motors by Improving the Quality of the Electric Current,” in: 2023 IEEE XVI International Scientific and Technical Conference Actual Problems of Electronic Instrument Engineering (APEIE), (2023), pp. 1820-1824). https://doi.org/10.1109/APEIE59731.2023.10347842

R.D. Crapnell, E. Bernalte, R. A. A. Mu˜noz, and C. E. Banks, “Electroanalytical overview: the use of laser-induced graphene sensors,” Anal. Methods, 17, 635-651 (2025). https://doi.org/10.1039/d4ay01793e

C.H. Kim, J.H. Kim, S.Y. Jeong, and B.S. Shine, ”Atomistic and data-driven modeling of laser-induced graphene formation on sustainable polymer substrates,” Sci. Rep. 15, 31627 (2025). https://doi.org/10.1038/s41598-025-15945-2

S.V. Pavlov, ”Defect Engineering in Laser-Induced Graphene (LIG) Through Temperature Control: A Reactive Molecular Dynamics Study,” Molecules, 30, 4344 (2025). https://doi.org/10.3390/molecules30224344

J.O. Sadullayev, M.M. Akhmedov1, M.E. Vapayev, I.Y. Davletov, and G.S. Boltaev, ”Modeling of Thermal Effects in a Polyimide Target Under Pulsed Laser Irradiation,” East European Journal of Physics, (1), 274–280 (2026). https://doi.org/10.26565/2312-4334-2026-1-31

Published
2026-06-10
Cited
How to Cite
Sadullayev, J., Akhmedov, M., Vapayev, M., Rajabov, A., Davletov, I., & Boltaev, G. (2026). Finite Element Modeling of Scanning Speed Effects in Femtosecond Laser-Induced Graphene Fabrication. East European Journal of Physics, (2), 352-360. https://doi.org/10.26565/2312-4334-2026-2-37

Most read articles by the same author(s)