Manufacturing Features and Characteristics of Uranium Dioxide Pellets for Subcritical Assembly Fuel Rods

  • Igor Chernov «Nuclear Fuel Cycle» Science and Technology Establishment, National Science Center «Kharkiv Institute of Physics and Technology», Kharkiv, Ukraine https://orcid.org/0000-0003-1424-4471
  • Аnton Kushtym «Nuclear Fuel Cycle» Science and Technology Establishment, National Science Center «Kharkiv Institute of Physics and Technology», Kharkiv, Ukraine https://orcid.org/0000-0001-7058-373X
  • Volodymyr Tatarinov «Nuclear Fuel Cycle» Science and Technology Establishment, National Science Center «Kharkiv Institute of Physics and Technology», Kharkiv, Ukraine
  • Dmytro Kutniy Scientific and Technical Service of Nuclear Materials and Export Control, National Science Center «Kharkiv Institute of Physics and Technology», Kharkiv, Ukraine https://orcid.org/0000-0001-9591-4013
Keywords: fuel rod, pellet, fuel assembly, powder, uranium dioxide, enrichment, mixture uniformity, density, microstructure

Abstract

The influence of technological processes and manufacturing of uranium dioxide fuel pellets for fuel elements for experimental fuel assembly (FA-X) which was designed as an alternative fuel for the nuclear research installation (NRI) "Neutron Source Controlled by Electron Accelerator" were investigated. Unlike standard production processes of UO2 pellets, the special feature fabrication process of this nuclear fuel type is production of uranium dioxide powder with enrichment of 4.4 %wt. of 235U achieved by mixing of two batches of powders with different uranium contents: 0.4 %wt. 235U and 19.7%wt. 235U, as well as ensuring the required tolerance of fuel pellets without the use of machining operations. A set of design and process documentation were developed in the R&D Center at NSC KIPT. Experimental stack of fuel pellets, fuel elements and a pilot fuel assembly FA-X were fabricated and designed to be compatible and interchangeable with VVR-M2 fuel assembly adopted as a standard assembly for the first fuel loading at the "Neutron Source Driven by an Electron Accelerator" FA. As opposition to the variant of VVR-M2 fuel assembly which consisted of three fuel rods of tubular shape with dispersion composition UO2‑Al, FA-X accommodates six fuel rods of pin-type with UO2 pellet which located in the zirconium cladding (E110) as the closest analogue of fuel rods of VVER-1000 power reactor. Inside cladding locate a 500 mm high fuel stack which is secured against displacement by a spacer. In the basic variant of FA-X the fuel pellets are made of UO2 with 235U enrichment near 4.4 %wt.

Downloads

Download data is not yet available.

References

N.I. Aizatskii, B.V. Borts, A.N. Vodin, P.A. Demchenko, A.Yu. Zelinskii, I.M. Karnaukhov, V.A. Kushnir, V.V. Mi-trochenko, A.O. Mytsykov, I.M. Nekliudov, S.N. Oleinik, F.A. Peev, G.D. Pugachiov, S.A. Soldatov, I.V. Ushakov, I. Gohar, I. Bolshinskii, Ya.L. Chi, S.L. Pei, S.H. Wong, V.B. Liu. PAST, 3 (79) (2012), https://vant.kipt.kharkov.ua/TABFRAME.html

V.G. Aden, E.F. Kartashev, V.A. Lukitchev, P.I. Lavrenyuk, V.M. Tchernishоv,A.V. Vatulin, A.V. Morozov, V.B. Suprun, A.B. Alexandrov, A.A. Enin. PAST, 5 (88) (2005), https://vant.kipt.kharkov.ua/ARTICLE/VANT_2005_5/article_2005_5_3.pdf

Draft specifications 12-1-044.00.00. FA-X of a nuclear facility "Neutron source based on an accelerator-controlled subcritical assembly", «Nuclear Fuel Cycle» Science and Technology Establishment National Science Center «Kharkiv Institute of Physics and Technology», 2022.

Technical requirements No. 12-1-081. Fuel tablets from uranium dioxide. «Nuclear Fuel Cycle» Science and Technolo-gy Establishment National Science Center «Kharkiv Institute of Physics and Technology», 2013.

Kuleshov A.V. et al, Patent Russian Federation No. 2376663, (10.08.2010). (in RF), https://patentimages.storage.googleapis.com/ea/b1/19/b700b304237012/RU2376665C2.pdf

Kucherenko A.V. et al, Patent Russian Federation No. 2317601, (20.02.2008). (in RF), https://patentimages.storage.googleapis.com/9c/56/4a/81d326afa6ef86/RU2317601C1.pd)

I.I. Loktev, A.B. Alexandrov et al. Proceedings of the Tomsk Polytechnic Institute. 7, (307), (2004), https://doc365.ru/uploads/store/5fc416b5b45e60.45419985_hkgfmepliqnoj.pdf

Stetsky Yu. A. et al, Patent Russian Federation No. 2182378, (20.12.2009). (in RF),

ASTM C776-00. Standard Specification for Sintered Uranium Dioxide Pellets, https://www.astm.org/c0776-00.html

Published
2022-09-02
Cited
How to Cite
Chernov, I., KushtymА., Tatarinov, V., & Kutniy, D. (2022). Manufacturing Features and Characteristics of Uranium Dioxide Pellets for Subcritical Assembly Fuel Rods. East European Journal of Physics, (3), 59-66. https://doi.org/10.26565/2312-4334-2022-3-08