About one method of determining coil misalignments IN TOKAMAK
Abstract
The paper presents a highly sensitive “e-beam” method of determining misalignments of elements in the ITER-like magnetic system on the base of magnetic measurements. It is suggested to make a “tokamak-stellarator” hybrid by means of addition to the ITER-like magnetic system of a new, not helical Saw Tooth-shaped Coil1 (STC) in order to provide the creation of “resonance” magnetic surfaces with the angles of rotational transform t = n/m = 1/2 or t = 1/3. In one of variants the STC parts can be introduced into the vacuum vessel through the largest port and assembled into a single coil. The calculations of the ITER-like magnetic configuration show that due to the turn of the poloidal field coil PF3 around the axis X direction at an angle α = 1′ the resonance structure is formed with t = 1/2 and the maximum island width δ0≈50 mm. Under this tilt the maximum misalignment of coil elements from the design position Δα is only 3.5 mm. So, we have found the means for identification of misalignments in the case of magnetic system elements deviation from the design position to the values Δα » 1 mm that leads to the values of perturbing fields bj/B0 ≈ 3 10 –6.
Downloads
References
Danilkin I.S. Vliyanie geometricheskikh pogreshnostei magnitnoi sistemy na topologiyu polya stellaratora. Kn. Stellaratory. M.: Nauka. – 1973. - C. 26-49. (Ivanovskii M. A. i dr. Stellarator TOP-2// Trudy FIAN SSSR. – 1973.- T.65. - C. 65 - 72).
Morozov A.I., Solov'ev L.S. Geometriya magnitnogo polya // Vopr. teorii plazmy. – 1963. - Vyp.2. - S. 3-91.
Solov'ev L.S., Shafranov V.D. Zamknutye magnitnye konfiguratsii dlya uderzhaniya plazmy // Vopr. teorii plazmy. – 1967. - Vyp.5. – S.3–208.
Chirikov B.V. Stokhasticheskoe razrushenie magnitnykh poverkhnostei stellaratora // DAN SSSR. - 1967. - T.174. - № 6. - S.1313–1316.
ITER Physics Basis // Nuclear Fusion. – 1999. – Vol. 39. – P.2137-2173.
Brouchous D.A., Georgiyevskiy A.V., Hershkowitz N., Kishinevsky M., Rudakov V.A. // “PHAEDRUS-T” Tokamak Plasma with Externally Applied Rotational Transform. – In: ANS-95, Winter Meeting, Washington. – 1995. – P. 237-241.
Bykov V.E., Voitsenya V.S., Volkov E.D., Georgievskiy A.V., Schworer K., Hailer et H. et al. Study of the modified Uragan-3M torsatron magnetic configuration // VANT, Ser. Thermonuclear Fusion. - M: ZNII Atominform. – 1990. – Vol. III. - P.12.
Lesnyakov G.G., Volkov E.D., Georgiyevskiy A.V. et al. Study of magnetic configuration of the l=3 torsatron by the triode and the luminescent rod methods // Nucl. Fus. – 1992. – Vol. 32. – P.2157-2176.
Lee D.K., Harris J.H., Colchin R.J., et al. Field Error Modelling Studies in the ATF. – In: 7-th International Workshop on Stellarators. Oak Ridge, Tennessee. – 1989, April 10-14. – P.3-5.
Control Task Force Meeting at Nake JWS. – 1996, April 19-23.
Fredrickson E., Georgiyevskiy A.V., Rudakov V.A., Zarnstorff M.C. Using e-beam mapping to detect coil misalignment in NCSX. – In: 15th International Stellarator Workshop, Madrid. – October 2005. – Rep. P1-10.
Copyright (c) 2013 V.A. Rudakov, A.V.Georgiyevskiy
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).