Performance Optimization of MgHfS3 Chalcogenide Perovskite Solar Cells Using SCAPS-1D
Abstract
In this work, magnesium hafnium sulfide MgHfS3 perovskite solar cells have been investigated using numerical modelling and simulation. Perovskite solar cells have received increasing recognition owing to their promising light-harvesting properties. The modelling and simulation of MgHfS3 was successfully carried out using the Solar cell capacitance simulator (SCAPS-1D) software. Consequently, this study developed a base model structure of FTO/TiO2/MgHfS3/Cu2O/Au and subsequently explored the effect of varying device layer properties such as absorber thickness, total and interface defect densities with a view of optimizing these parameters for better device performance. Simulating the base model gave the performance characteristics of 0.99 V, 25.21 mA/cm2, 57.59%, and 14.36% which are the open-circuit voltage (Voc), short-circuit current density (Jsc), fill factor (FF) and PCE respectively. The optimal absorber thickness was found to be 300 nm and the optimum density of defects for both TiO2/Absorber interface and Absorber/Cu2O interface are respectively 1010 cm-3 and 109 cm-3. The obtained optimized PV parameters are Voc = 1.2629 V, Jsc = 24.44 mA/cm2, FF = 89.46% and PCE = 27.61%. Also, it was established that increasing the device temperature beyond 300K enhanced the short circuit current while other performance characteristics gradually declined. The obtained results suggest that chalcogenide MgHfS3 is a potential absorber material candidate for the production of cheap and very efficient environment-friendly perovskite solar cells.
Downloads
References
NREL, “Photovoltaic Research,” Interactive Best Research-Cell Efficiency Chart. Accessed: Mar. 01, 2024. [Online]. Available: https://www.nrel.gov/pv/interactive-cell-efficiency.html
D. Tiwari, O.S. Hutter, and G. Longo, “Chalcogenide perovskites for photovoltaics: current status and prospects,” J. Phys. Energy, 3(3), 034010 (2021). https://doi.org/10.1088/2515-7655/abf41c
S. Karthick, S. Velumani, and J. Bouclé, “Chalcogenide BaZrS3 perovskite solar cells: A numerical simulation and analysis using SCAPS-1D,” Opt. Mater. 126, 112250 (2022). https://doi.org/10.1016/j.optmat.2022.112250
H. Shaili, et al., “Synthesis of the Sn-based CaSnS3 chalcogenide perovskite thin film as a highly stable photoabsorber for optoelectronic applications,” J. Alloys Compd. 851, 156790 (2021). https://doi.org/10.1016/j.jallcom.2020.156790
Q.A. Akkerman, and L. Manna, “What Defines a Halide Perovskite?,” ACS Energy Lett. 5(2), 604–610 (2020). https://doi.org/10.1021/acsenergylett.0c00039
W. Meng, B. Saparov, F. Hong, J. Wang, D. B. Mitzi, and Y. Yan, “Alloying and Defect Control within Chalcogenide Perovskites for Optimized Photovoltaic Application,” Chem. Mater. 28(3), 821–829 (2016). https://doi.org/10.1021/acs.chemmater.5b04213
Y. Nishigaki, et al., “Extraordinary Strong Band‐Edge Absorption in Distorted Chalcogenide Perovskites,” Sol. RRL, 4(5), 1900555 (2020). https://doi.org/10.1002/solr.201900555
Y.-Y. Sun, M. L. Agiorgousis, P. Zhang, and S. Zhang, “Chalcogenide Perovskites for Photovoltaics,” Nano Lett. 15(1), 581 585 (2015). https://doi.org/10.1021/nl504046x
M. Kumar, A. Singh, D. Gill, and S. Bhattacharya, “Optoelectronic Properties of Chalcogenide Perovskites by Many-Body Perturbation Theory,” J. Phys. Chem. Lett. 12(22), 5301–5307 (2021). https://doi.org/10.1021/acs.jpclett.1c01034
R.O. Balogun, M.A. Olopade, O.O. Oyebola, and A.D. Adewoyin, “First-principle calculations to investigate structural, electronic and optical properties of MgHfS3,” Mater. Sci. Eng. B, 273, 115405 (2021). https://doi.org/10.1016/j.mseb.2021.115405
I. Gharibshahian, A.A. Orouji, and S. Sharbati, “Alternative buffer layers in Sb2Se3 thin‐film solar cells to reduce open‐circuit voltage offset,” Sol. Energy, 202, 294–303 (2020). https://doi.org/10.1016/j.solener.2020.03.115
V. C. Karade, et al., “Combating open circuit voltage loss in Sb2Se3 solar cell with an application of SnS as a back surface field layer,” Sol. Energy, 233, 435–445 (2022). https://doi.org/10.1016/j.solener.2022.01.010
Mamta, K. K. Maurya, and V. N. Singh, “Sb2Se3 versus Sb2S3 solar cell: A numerical simulation,” Sol. Energy, 228, 540–549, (2021). https://doi.org/10.1016/j.solener.2021.09.080
Mamta, K.K. Maurya, and V.N. Singh, “Enhancing the Performance of an Sb2Se3-Based Solar Cell by Dual Buffer Layer,” Sustainability, 13(21), 12320 (2021). https://doi.org/10.3390/su132112320
A. Srivastava, T.R. Lenka, and S. K. Tripathy, “SCAPS-1D Simulations for Comparative Study of Alternative Absorber Materials Cu2XSnS4 (X = Fe, Mg, Mn, Ni, Sr) in CZTS-Based Solar Cells,” in: Micro and Nanoelectronics Devices, Circuits and Systems, 781, edited by T.R. Lenka, D. Misra, and A. Biswas, (Springer, Singapore, 2022), pp. 329–337. https://doi.org/10.1007/978-981-16-3767-4_31
Md. D. Haque, Md.H. Ali, and A.Z.Md.T. Islam, “Efficiency enhancement of WSe2 heterojunction solar cell with CuSCN as a hole transport layer: A numerical simulation approach,” Sol. Energy, 230, 528–537 (2021). https://doi.org/10.1016/j.solener.2021.10.054
M. Minbashi, A. Ghobadi, M.H. Ehsani, H.R. Dizaji, and N. Memarian, “Simulation of high efficiency SnS-based solar cells with SCAPS,” Sol. Energy, 176, 520–525 (2018). https://doi.org/10.1016/j.solener.2018.10.058
S. Karthick, S. Velumani, and J. Bouclé, “Experimental and SCAPS simulated formamidinium perovskite solar cells: A comparison of device performance,” Sol. Energy, 205, 349–357 (2020). https://doi.org/10.1016/j.solener.2020.05.041
D. Jayan K, V. Sebastian, and J. Kurian, “Simulation and optimization studies on CsPbI3 based inorganic perovskite solar cells,” Sol. Energy, 221, 99–108 (2021). https://doi.org/10.1016/j.solener.2021.04.030
M. Mehrabian, E.N. Afshar, and S.A. Yousefzadeh, “Simulating the thickness effect of the graphene oxide layer in CsPbBr 3 - based solar cells,” Mater. Res. Express, 8(3), 035509 (2021). https://doi.org/10.1088/2053-1591/abf080
A. Chauhan, A. Oudhia, and A.K. Shrivastav, “Analysis of eco-friendly tin-halide Cs2SnI6-based perovskite solar cell with all-inorganic charge selective layers,” J. Mater. Sci. Mater. Electron. 33(3), 1670–1685 (2022). https://doi.org/10.1007/s10854-022-07723-x
M.R. Jani, et al., “Exploring solar cell performance of inorganic Cs2TiBr6 halide double perovskite: A numerical study,” Superlattices Microstruct. 146, 106652 (2020). https://doi.org/10.1016/j.spmi.2020.106652
D. Saikia, J. Bera, A. Betal, and S. Sahu, “Performance evaluation of an all inorganic CsGeI3 based perovskite solar cell by numerical simulation,” Opt. Mater. 123, 111839 (2022). https://doi.org/10.1016/j.optmat.2021.111839
A.J. Kale, R. Chaurasiya, and A. Dixit, “Inorganic Lead‐Free Cs2AuBiCl6 Perovskite Absorber and Cu2O Hole Transport Material Based Single‐Junction Solar Cells with 22.18% Power Conversion Efficiency,” Adv. Theory Simul. 4(3), 2000224 (2021). https://doi.org/10.1002/adts.202000224
Y. He, L. Xu, C. Yang, X. Guo, and S. Li, “Design and Numerical Investigation of a Lead-Free Inorganic Layered Double Perovskite Cs4CuSb2Cl12 Nanocrystal Solar Cell by SCAPS-1D,” Nanomaterials, 11(9), 2321 (2021). https://doi.org/10.3390/nano11092321
M. Burgelman, P. Nollet, and S. Degrave, “Modelling polycrystalline semiconductor solar cells,” Thin Solid Films, 361–362, 527–532 (2000). https://doi.org/10.1016/S0040-6090(99)00825-1
F. Azri, A. Meftah, N. Sengouga, and A. Meftah, “Electron and hole transport layers optimization by numerical simulation of a perovskite solar cell,” Sol. Energy, 181, 372–378 (2019). https://doi.org/10.1016/j.solener.2019.02.017
S. Karthick, O.M. Nwakanma, B. Mercyrani, J. Bouclé, and S. Velumani, “Efficient 2T CsKPb(IBr)3 Tin Incorporated Narrow Bandgap Perovskite Tandem Solar Cells: A Numerical Study with Current Matching Conditions,” Adv. Theory Simul. 4(11), 2100121 (2021). https://doi.org/10.1002/adts.202100121
V.K. Ravi, et al., “Colloidal BaZrS 3 chalcogenide perovskite nanocrystals for thin film device fabrication,” Nanoscale, 13(3), 1616–1623 (2021). https://doi.org/10.1039/D0NR08078K
S. Karthick, J. Bouclé, and S. Velumani, “Effect of bismuth iodide (BiI3) interfacial layer with different HTL’s in FAPI based perovskite solar cell – SCAPS-1D study,” Sol. Energy, 218, 157–168 (2021). https://doi.org/10.1016/j.solener.2021.02.041
K. Chakraborty, M.G. Choudhury, and S. Paul, “Numerical study of Cs2TiX6 (X = Br−, I−, F− and Cl−) based perovskite solar cell using SCAPS-1D device simulation,” Sol. Energy, 194, 886–892 (2019). https://doi.org/10.1016/j.solener.2019.11.005
M.S. Jamal, et al., “Effect of defect density and energy level mismatch on the performance of perovskite solar cells by numerical simulation,” Optik, 182, 1204–1210 (2019). https://doi.org/10.1016/j.ijleo.2018.12.163
G. Xing, et al., “Low-temperature solution-processed wavelength-tunable perovskites for lasing,” Nat. Mater. 13(5), 5 (2014). https://doi.org/10.1038/nmat3911
F. Wang, S. Bai, W. Tress, A. Hagfeldt, and F. Gao, “Defects engineering for high-performance perovskite solar cells,” Npj Flex. Electron. 2(1), 22 (2018). https://doi.org/10.1038/s41528-018-0035-z
L. Et-taya, T. Ouslimane, and A. Benami, “Numerical analysis of earth-abundant Cu2ZnSn(SxSe1-x)4 solar cells based on Spectroscopic Ellipsometry results by using SCAPS-1D,” Sol. Energy, 201, 827–835 (2020). https://doi.org/10.1016/j.solener.2020.03.070
S. Abdelaziz, A. Zekry, A. Shaker, and M. Abouelatta, “Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation,” Opt. Mater. 101, 109738 (2020). https://doi.org/10.1016/j.optmat.2020.109738
S. Mahesh, et al., “Revealing the origin of voltage loss in mixed-halide perovskite solar cells,” Energy Environ. Sci. 13(1), 258 267 (2020). https://doi.org/10.1039/C9EE02162K
W. Abdelaziz, A. Shaker, M. Abouelatta, and A. Zekry, “Possible efficiency boosting of non-fullerene acceptor solar cell using device simulation,” Opt. Mater. 91, 239–245 (2019). https://doi.org/10.1016/j.optmat.2019.03.023
D. Ompong, and J. Singh, “High open-circuit voltage in perovskite solar cells: The role of hole transport layer,” Org. Electron. 63, 104–108 (2018). https://doi.org/10.1016/j.orgel.2018.09.006
W. Tress, et al., “Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells,” Energy Environ. Sci. 11(1), 151-165 (2018). https://doi.org/10.1039/C7EE02415K
H. Baig, H. Kanda, A.M. Asiri, M.K. Nazeeruddin, and T. Mallick, “Increasing efficiency of perovskite solar cells using low concentrating photovoltaic systems,” Sustain. Energy Fuels, 4(2), 528–537 (2020). https://doi.org/10.1039/C9SE00550A
A. Mahapatra, et al., “Changes in the Electrical Characteristics of Perovskite Solar Cells with Aging Time,” Molecules, 25(10), 2299 (2020). https://doi.org/10.3390/molecules25102299
M. Becker, and M. Wark, “Sequentially Deposited Compact and Pinhole-Free Perovskite Layers via Adjusting the Permittivity of the Conversion Solution,” Z. Für Naturforschung A, 74(8), 655–663 (2019). https://doi.org/10.1515/zna-2019-0141
Z. Bi, et al., “High Shunt Resistance SnO2‐PbO Electron Transport Layer for Perovskite Solar Cells Used in Low Lighting Applications,” Adv. Sustain. Syst. 5(11), 2100120 (2021). https://doi.org/10.1002/adsu.202100120
D. Saranin, et al., “Copper Iodide Interlayer for Improved Charge Extraction and Stability of Inverted Perovskite Solar Cells,” Materials, 12(9), 1406 (2019). https://doi.org/10.3390/ma12091406
R. Singh, S. Sandhu, and J.-J. Lee, “Elucidating the effect of shunt losses on the performance of mesoporous perovskite solar cells,” Sol. Energy, 193, 956–961 (2019). https://doi.org/10.1016/j.solener.2019.10.018
M.A. Green, “General temperature dependence of solar cell performance and implications for device modelling,” Prog. Photovolt. Res. Appl. 11(5), 333–340 (2003). https://doi.org/10.1002/pip.496
Y.H. Khattak, F. Baig, S. Ullah, B. Marí, S. Beg, and H. Ullah, “Enhancement of the conversion efficiency of thin film kesterite solar cell,” J. Renew. Sustain. Energy, 10(3), 033501 (2018). https://doi.org/10.1063/1.5023478
Copyright (c) 2024 Adeyinka D. Adewoyin, Abdulai M. Feika, Muteeu A. Olopade
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
