Experimental research of multicomponent multilayer ion-plasma avinit coatings

A. V. Sagalovych Scientific technological Corporation “FED”
A. V. Kononykhin Scientific technological Corporation “FED”
V. V. Popov Scientific technological Corporation “FED”
V. V. Sagalovych Scientific technological Corporation “FED”

Keywords: plasma-vacuum deposited multicomponent multilayer, nanolayer coatings, tribology

Abstract

Metallographic examination of improved structures of Avinit С multilayer nitride-based coatings, particularly coatings of Ti-Al-N system and Mo-N system-based coating have been carried out. Use of effective methods of surface cleaning and three-level arc control system in the techniques under development for prevention of surface damaging, caused by micro arcs, allows to apply coatings of precision and high finish class surfaces up to 12 – 13 grade of finish without deterioration of surface finish class. The experimental findings confirm a possibility of low-temperature deposition of very hard Avinit С coatings based on nitrides of metals under the conditions providing good adhesion to the parent material (steel DIN 1.2379 (Х12Ф1) without decrease in strength properties of the steel (<200 °C) and without distortion of the coated surfaces. Tribological examination of advanced constructions of multicomponent multilayer Avinit coatings under aviation fuel ТS-1 for the purpose of selection of coating materials for friction parts of precision couples used in aggregate building. Deposition of coatings effectively raises durability of friction pairs to scoring. Advanced coatings have low friction coefficients (0.75 − 0.095) at loadings up to 2.0 kN and have shown high wear resistance. The received results allow to develop software products for obtaining of multicomponent multilayer coatings of required composition using Avinit equipment and tryout stable techniques for deposition of functional coatings to be used in friction parts of precision couples of standard aircraft units.

Downloads

Download data is not yet available.

Author Biographies

A. V. Sagalovych, Scientific technological Corporation “FED”

с.н.с.

A. V. Kononykhin, Scientific technological Corporation “FED”

с.н.с.

V. V. Popov, Scientific technological Corporation “FED”

с.н.с.

V. V. Sagalovych, Scientific technological Corporation “FED”

с.н.с.

References

Veprek S., Reiprich S. Concept for the design of novel super hard coatings//Thin Solid Films. − 1995. − Vol. 268. − P. 64-67.

Korotayev A.D., Moshkov V.Yu. et al. Nanostructure and nanocomposite superhard coatings //Physical mezomehanika.− 2005. − Vol. 8, № 5. − P. 103-116.

Haurt R., Patscheider J. From alloying to nanocomposites - improved performance of hard coatings //Advanced Engineering Materials. − 2000. − Vol. 2, № 5. − P. 247-259.

Veprek S. The search for novel, superhard materials//J. Vac. Sci. Technol. − 1999. − A 17(5). − Р. 2401-2420.

Musil J., Zeman P., Hruby H., Mayrhofer P.H. ZrN/Cu nanocomposite film − a novel superhard material//Surface and Coatings Technology. − 1999. − Vol. 120-121. − Р. 179-18.

Sam Zhang, Yongqing Fu, Hejun Du et. al. Magnetron deposition of nanocomposite (Ti, Cr) CN/DLC coatings//Surface and Coatings Technology. − 2002. − Vol. 162. − P. 42-48.

Veprek S., Veprek-Heijman M., Karvankova P., Prochazka J Different approaches to superhard coatings and nanocomposites//Thin Solid Films. − 2005. − Vol. 476. − P. 1-29.

Lyubchenko A., Sagalovich A.V., Sagalovich V., et. al. Examination of friction and wear characteristics of ionic-plasma coatings produced on aluminum alloy//Physical surface engineering. − 2004. − Vol. 2, № 1-2. − P. 110-114.

Popov V.V., Sagalovych A.V., Dudnik S.F. et. al. Development of multicomponent coatings for improvement of wear resistance of friction couples surfaces in precision assemblies//Physical surface engineering. − 2007. − Vol. 5, №3-4. − P. 154-165.

Sagalovych A.V., Sagalovych V.V., Dudnik S.F. Automated system of deposition of functional nanosized coatings//Equipment and tools. − 2005. − Vol. 12. − P. 2-3.

Sagalovych A.V., Kononykhin A.V., Popov V.V. et. al. Avinit installation for deposition of multilayer functional coatings//Physical surface engineering. − 2010. − Vol. 8. − P. 336-347.

Dudnik S.F., Sagalovych А.V., Sagalovych V.V. et. al. Examination of friction and wear properties of the ion-plasma coatings obtained over an aluminium alloy//Physical surface engineering. − 2004. − Vol. 2. − P. 110-114.

Valitov A.M., A. Shilov Thickness control instruments and methods: Thickness control instruments and methods. − L. − 1985. − P. 256.

Khoroshikh V.M., Holomeev M.G. Spatial distribution of particle fluxes in a stationary low pressure arc discharge//Physical surface engineering. − 2004. − Vol. 2, № 1-2. − P. 24-27.

Aksenov I.I., Belous V.A., Vasiliev V.V. et. al. A rectilinear separator of carbonic plasma of a vacuum arc//Issues of atomic science and engineering. − 2002. − № 2. − P. 127-130.