Efficiency of protective coatings based on cBN, Ti-B-C and AlN-(Ti-Cr(Si))B2 systems for cutting tools

П. В. Турбін Науковий фізико-технологічний центр МОН та НАН України
О. Ю. Кропотов Науковий фізико-технологічний центр МОН та НАН України
В. Г. Удовицький Науковий фізико-технологічний центр МОН та НАН України
О. Л. Самсонік Харківський національний університет імені В. Н. Каразіна
П. А. Сребнюк Харківський національний університет імені В. Н. Каразіна
Д. В. Горох Харківський національний університет імені В. Н. Каразіна

Keywords: protective coatings, cubic boron nitride, magnetron sputtering method, vacuum-arc deposition method, nitrides of refractory metals, cutting tools

Abstract

The physical and mechanical properties of nanostructured protective coatings of cBN, Ti-B-C and AlN-(Ti-Cr(Si))B2 systems formed by ion-plasma methods are studied. Close to optimal physical and technological parameters of coating formation by vacuum-arc deposition method and magnetron sputtering method are determined. The coating was formed on the working surfaces of the cutting tool and their laboratory testing was carried out. It is proved that the use of protective coatings increases the efficiency of the cutting tool by 2–3 times.

Downloads

References

Klimenko S. A., Klimenko S. A., Manohin A. S., Beresnev V. M. Osobennosti primeneniya rezhuschih instrumentov iz polikristallicheskogo kubicheskogo nitrida bora s zaschitnym pokrytiem // Sverhtverdye materialy. — 2017, No. 4. — P. 88–100.

Musil J. Hard and superhard nanocomposite coatings // Surf. Coat. Tehnol. — 2000. — Vol. 125. — P. 322–330.

Kunc F., Musil J., Mayrhofer R. N., Mitterer F. Low stress superhard Ti-V films prepared magnetron sputtering // Surf. Coat. Techn. — 2003. — Vol. 175. — P. 744–781.

Nanostrukturnye pokrytiya // Pod red. A. Kavalejro i D. de Hossona. M.: Tehnosfera. — 2011. — 792 p.

Berlin E. V., Sejdman L. A. Ionno-plazmennye processy v tonkoplenochnoj tehnologii. M.: Tehnosfera. — 2010. — 528 p.

Aksenov I. I., Andreev A. A., Belous V. A., Strel’nickij V. E., Horoshih V. M. Vakuumnaya duga: istochniki plazmy, osazhdenie pokrytij, poverhnostnoe modificirovanie. K.: Naukova dumka. — 2012. — 727 p.

Azarenkov N. A., Sobol’ O. V., Pogrebnyak A. D., Beresnev V. M., Litovchenko S. V., Ivanov O. N. Materialovedenie neravnovesnogo sostoyaniya modificirovannoj poverhnosti. Sumy: Sumskoj gosudarstvennyj universitet. — 2012. — 683 p.

Emel’yanov V. I., Ruhlyada N. Ya. Defektnoinducirovannaya neustojchivost’ i obrazovanie poverhnostnyh struktur s dvumya masshtabami pri obrabotke poverhnosti plazmoj // Naukoemkie tehnologii. — 2009. — Vol. 10, No. 6. — P. 3–13.

Zel’cer I. A., Karabanov A. S., Moos E. N. Obrazovanie dissipativnyh struktur v kristallah pri termo- i elektroperenose // FTT. — 2005. — Vol. 47, vyp. 11. — P. 1921–1926.

Azarenkov N. A., Sobol’ O. V., Pogrebnyak A. D., Beresnev V. M. Inzheneriya vakuumno-plazmennyh pokrytij. H.: HNU imeni V. N. Karazina. — 2011. — 344 p.

Balmain W. H. Observation on the formation of compounds of boron and silicon with nitrogen and certain metals // Phil. Mag. 1842. — Vol. 21, No. 138. — P. 270–277.

Pakdel A., Zhi C., Bando Y., Golberg D. Low-dimensional boron nitride nanomaterials // Materialstoday. — 2012. — Vol. 15, No. 6. —P. 256–265.

Wentorf R. H. Jr. Cubic Form of Boron Nitride // The Journal of Chemical Physics. — 1957. — Vol. 26, No. 4. — 956 p.

Kurdyumov A. V., Brigun V. F. Turbostratnyj nitrid bora: osobennosti struktury i fazovyh prevraschenij // Nanostrukturnoe nanomaterialovedenie. — 2010. — No. 1. — P. 3–8.

Haubner R., Wilhelm M., Weissenbacher R., Lux B. Boron Nitrides-Properties, Synthesis and Applications. In: D. M. Mingas, M. Jansen (eds) High Performance Non-Oxide Ceramics II. // Springer-Verlag Berlin Heidelberg. — 2002. — P. 1–45.

Batsanov S. S. Features of phase transformations in boron nitride // Diamond & Related Materials. — 2011. — Vol. 20. — P. 660–664.

Örnek M., Reddy K. M., Hwang C., Domnich V., Burgess A., Pratas S., Calado J., Xie K. Y., Miller S. L., Hemker K. J., Haber R. A. Observations of explosion phase boron nitride formed by emulsion detonation synthesis // Scripta Materialia. — 2018. — Vol. 145. — P. 126–130.

Narayan J., Bhaumik A., Xu W. Direct conversion of h-BN into c-BN and formation of epitaxial c-BN/diamond heterostructures // Lournal of Applied Physics. — 2016. — Vol. 119. — P. 185302.

Narayan J., Bhaumik A. Discovery of Q-BN and Direct Conversion of h-BN into c-BN and Formation of Epitaxial c-BN/Diamond Heterostructures // MRS Advances. Iss 37; nanotechnology. — 2016. — Vol. 1. — P. 2573–2586.

Narayan J., Bhaumik A. Fundamental Discovery of Q-Phases and Direct Conversion of Carbon into Diamond and h-BN into c-BN Chapt I. In: Zhu Y., Maloy S., Liaw P. (eds) Mechanical and Creep Behavior of Advanced Materials // The Minerals, Metals & Materials Series. Springer. — 2017. — 293 p.

Dobrzhinetskaya L. F., Wirth R., Yang J., Hutcheon I. D., Weber P. K., Green H. W. II. High-pressure highly reduced nitrides and oxides from chromitite of a Tibetan ophiolite // PNAS November 17. — 2009. — Vol. 106,

No. 46. — P. 19233–19238.

Dobrzhinetskaya L. F., Wirth R., Yang J., 1Green H. W., Hutcheon I. D., Weber P. K., Grew E. S. Qingsongite, natural cubic boron nitride: The first boron mineral from the Earth’s mantle // American Mineralogist. — 2014. — Vol. 99. — P. 764–772.

Classification (CNMNC) // Mineralogical Magazine. — August 2013. — Vol. 77(6). — P. 2695–2709.

Digonskij S. V. Nekotorye svedeniya iz istorii sinteza kubicheskogo nitrida bora dlya lezvijnogo rezhuschego instrumenta // Al’ternativnaya energetika i ekologiya. — 2014, No. 09 (149). — P. 49–57.

Edited by Y. Chen. Nanotubes and nanosheets. Functionalization and Applications of Boron Nitride and Other Nanomaterials by Taylor & Francis Group, LLCCRC. — 2015. — 607 p.

Lauridsena J., Nedforsb N., Janssonb U., Jensena J., Eklunda P., Hultmana L. TiB-C nanocomposite coatings deposited by magnetron sputtering // Applied Surface Science. — 2012. — Vol. 258. — P. 9907–9912.

Knotek R., Breidenbach F., Jungblut, Loffler F. Superhard Ti-B-C-N coating // Surface and Coatings Technology. — 1990. — Vol. 43– 44. — P. 107–115.

Sanchez-L’opez J. C., Abad M. D., Justo A., Gago R., Endrino J. L., Garcıa-Luisand A. M. Brizuela. Phase composition and tribomechanical properties of Ti-B-C nanocomposite coatings prepared by magnetron sputtering // Journal of Physics D: Applied Physics. — 2012. — Vol. 45. — P. 375–401.

Levashov E. A., Kosayanin V. I., Krukova L. M., Moore J. J., Olson D. L. Structure and properties of Ti-C-B composite thin films produced by sputtering of composite TiC-TiB2 targets // Surface and Coatings Technology. — 1997. — Vol. 92. — P. 34–41.

Abad M. D., Caceres D., Pogozhev Y. S., Shtansky D. V., Sanchez-Lopez J. C. Bonding Structure and Mechanical Properties of Ti-B-C Coatings // Plasma Process and Polymer. — 2009. — Vol. 6. — P. 107–112.

Vereschaka A. S., Vereschaka A. A. Povyshenie effektivnosti instrumenta putem upravleniya sostavom, strukturoj i svojstvami pokrytij // Uprochnyayuschaya tehnologiya i pokrytiya. — 2005. — No. 9. — P. 9–18.

Finkel’ V. M. Fizicheskie osnovy tormozheniya razrusheniya // M.: Metallurgiya. — 1977. — 348 p.

Libovic G. Razrushenie metallov. Matematicheskie osnovy teorii razrusheniya. — M.: Mir. — 1975. — Vol. 2. — 768 p.

Torianik І. N., Beresnev V. M., Pog rebnjak A. D., Sobol O. V., Be res neva Ye. V., Pod cherniaieva I. A., Kropotov A. Yu., Stiervoiedov N. G., Turbin P. V., Kolesnikov D. A., Grankin S. S., Nyemchenko U. S., Srebniuk P. A., Novikov V. Yu. Magnetron sputtering of high temperature composite ceramics AlN-TiB2-TiSi2 // Phys. Surf. Eng. 2013. — Vol. 11, No. 3. — P. 299– 303.

Klimenko S. A., Kopejkina M. Yu., Klimenko S. A., Manohin A. S. Konceptciya pokrytiya dlya rezhuschih instrumentov iz polikristallicheskih kompozitov na osnove kubicheskogo nitrida bora // Іnformacіjnі tehnologії v osvіtі, naucі ta virobnictvі. — 2016, vip. 2(13). — P. 108–114.