SINGLE AND DUAL-POINTING DEVICE FOR MOVING THE SAMPLE LU-40 KIPT
Abstract
Developed two electro-mechanical device with remote control, designed to move the samples one and two dimensions in a highbackground radiation. Samples movement carried in mechanical block by stepper motor with holding torque 5.6 kgf·cm and angle precision 1.8°/step. Motor control and control of samples coordinates implements by dint on electronic block, based on PIC16f76 microcontroller and Usart-RS485 interface converter based on Max 485 microchip. Devices can move objects weighing up to 100 g with an accuracy of 0.5 mm. The testing of the two-coordinate device in experiments on electron beam accelerator LU-40 KIPT have been held. The two-dimensional distribution of relative density of the flow distribution of brake γ-rays have been measured by ionization detector.
Downloads
References
http://www.focus-nuclear.com/pdf/TP_AUMA.pdf.
http://www.zpa-pecky.cz/electric-actuators/multi-turn/moa-oc.htm?lang=en.
http://www.bernardcontrols.com/en/valve-actuator-market/nuclear-energy/.
Vodin A.N., Olejnik S.N., Tuller G.Je., Tertichnyj A.V. Dvuh-koordinatnaja sistema dlja peremeshhenija datchika izmerenija plotnosti potoka γ-kvantov // Tezisy dokladov na HI Konferencii po fizike vysokih energij, jadernoj fizike i uskoriteljam, Har'kov, 11-15 marta 2013 g. – S.116.
Ayzatskiy M.I., Borts B.V., Vodin A.N. at all. NSC KIPT Neutron Source // Problems of Atomic Science and Technology, series Nuclear Physics Investigations. – 2012. – No.3(79). – P.3-9.
L297 Stepper Motor Controller Datasheet http://www.st.com/st-webui/static/active/en/resource/technical/document/datasheet/CD00000063.pdf
L298 Dual Full Bridge Driver Datasheet http://www.st.com/st-webui/static/active/en/fragment/website_building_block/site_media/icon/pdf_icon_large.jpg
Pic16f7x 28/40-pin, 8-bit Cmos Flash Microcontrollers DataSheethttp://ww1.microchip.com/downloads/en/DeviceDoc/30325b.pdf
Lovygin A.A., Teverovskij L.V. Sovremennyj stanok s ChPU i CAD/CAM-sistema. – DMK-Press, 2012. – 279s.
Pabla B.S., Adithan M. CNC Machines. – New Age International, 1994. – 107p.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
