Investigation of the Structural Composition of Fe-Mn-Si-Ti-Al-N-C Alloys and the Solubility of Elements in α-Iron
Abstract
The study of the structural components of Fe-Mn-Si-Ti-Al-N-C with the carbon content of 0.50-0.60% (wt.), Silicon 0.80-0.90% (wt.), Manganese 0.90-0.95% ( wt. ), Aluminum - 0.20-0.30% (wt.), Titanium - 0.02-0.03% (wt.), Nitrogen - 0.015-0.02% (wt.), the rest - iron. Microstructural, micro-X-ray spectral and X-ray phase analyzes were used to determine the structural state of the alloys. It is shown that after crystallization and a number of phase transformations the structure of the alloy was presenteda - iron alloyed with cementite, oxides, nitrides and carbonitrides. Using the quasi-chemical method, the free energy dependence of the solid solution of α-iron alloyed with silicon, manganese and titanium was obtained. In α-iron, it can dissolve up to 0.016% (at.) Carbon, manganese up to 1.3% (at.), Silicon - 1.0% (at.), and titanium up to 0.5% (at.), which is consistent with experimental results.
Downloads
References
Y. Tu, L. Huang,, et al., Materials Science and Technology, 34(7), 780 (2018), https://doi.org/10.1080/02670836.2017.1407558
C. Zhu, et. al. Ultramicroscopy, 107(9), 808 (2007), https://doi.org/10.1016/j.ultramic.2007.02.033
G. Miyamoto, Oh J, Hono K, et al., Acta Mater. 55(15), 5027 (2007), https://doi.org/10.1016/j.actamat.2007.05.023
Y.Y. Tu, Z. G. Mao, Q. Zhang, et. al, Mater Lett. 134, 84 (2014), https://doi.org/10.1016/j.matlet.2014.07.057
І. Gutierrez-Urrutia, ISIJ International, 61(1), 16 (2021), https://doi.org/10.2355/isijinternational.ISIJINT-2020-467
N. Filonenkoa A. Babachenko, G. Kononenko, and E. Domin, East. Eur. J. Phys, 4, 90 (2020), https://doi.org/10.26565/2312-4334-2020-4-12
J. Miettinen, V.-V. Visuri, and T. Fabritius, Thermodynamic description of the Fe–Al–Mn–Si–C system for modelling solidification of steels, (University of Oulu, Oulu, 2019). pp. 704, http://jultika.oulu.fi/files/isbn9789526222516.pdf
P. Głowacz, M. Tenerowicz-Żaba, M. Sułowski, and J. Konstanty, International Journal NDTDays, II(3), (2019).
Ch. Krishna Ande, H.F. Marce, Metallurgical and Materials Transactions, A 4436, 43A (2012), https://doi.org/10.1007/s11661-012-1229-y
S.V. Tverdokhlebova, Vіsnyk Dnіpropetrovskogo nacіonalnogo unіversitetu. Serіja Fіzika. Radіoelektronіka, 14(12/1), 100 (2007).
O.V. Akymov, and S.M. Nury, Eastern-European Journal of Enterprise Technologies, 6(11/78), 35 (2015), https://doi.org/10.15587/1729-4061.2015.56370
A.P. Huliaev, and A.A. Huliaev, Металловедение [Metalscience], (Midalliance, 2011), pp. 644. (in Russian)
M.P. Shaskolskaya, Кристаллография [Crystallography], (Vyisshay Shkola, Moscow, 1984), pp.376. (in Russian)
Z.A. Matysina, and M.I. Milyan, Теория растворимости примеси в упорядоченных фазах [Solubility theory residual element in ordered phase], (DGU, Dnipro, 1991). pp.180.(in Russian).
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
