Neuromechanical characterization of brain damage in response to head impact and pathological changes
Abstract
Traumatic injuries to the central nervous system (brain and spinal cord) have received special attention because of their devastating socio-economical cost. Functional and morphological damage of brain is the most intricate phenomenon in the body. It is the major cause of disability and death. The paper involves constitutive modeling and computational investigations towards an understanding the mechanical and functional failure of brain due to the traumatic (head impact) and pathological (brain tumor) events within the framework of continuum damage mechanics of brain. Development of brain damage has been analyzed at the organ scale with the whole brain, tissue scale with white and gray tissue, and cellular scale with an individual neuron. The mechanisms of neurodamage growth have been specified in response to head impact and brain tumor. Swelling due to electrical activity of nervous cells under electrophysiological impairments, and elastoplastic deformation and creep under mechanical loading of the brain have been analyzed. The constitutive laws of neuromechanical behavior at large strains have been developed, and tension-compression asymmetry, as well as, initial anisotropy of brain tissue was taken into account. Implementation details of the integrated neuromechanical constitutive model including the Hodgkin-Huxley model for voltage into ABAQUS, ANSYS and in-house developed software have been considered in a form of the computer-based structural modeling tools for analyzing stress distributions over time in healthy and diseased brains, for neurodamage analysis and for lifetime predictions of diseased brains. The outcome of this analysis will be how the neuromechanical simulations applied to the head impact and brain tumor therapies may assist medical specialists with their decisions during planning and application of medical surgeries.
Downloads
References
Heiss, W. D. (1983). Flow thresholds of functional and morphological damage of brain tissue. Stroke, 14(3), 329-331. https://www.ahajournals.org/doi/10.1161/01.STR.14.3.329
Chayka, A. V., Zaben’ko, Y. Y., Labunets, I. F., Pivneva, T. A. (2017).Traumatic brain injury: pathogenesis, experimental models, prospects of cell-based therapy. Cell and Organ Transplantology,
(1), 200-208. DOI: 10.22494/cot.v5i2.78
Huse, J. T., Holland, E. C. (2010). Targeting brain cancer: advances in the molecular pathology of malignant glioma and medulloblastoma. Nature Reviews Cancer, 10(5), 319-331. DOI: 10.1038/nrc2818
McKee, A. C., Stein, T. D., Nowinski, C. J., Stern, R. A., Daneshvar, D. H., Alvarez, V. E., Lee, H.-S., Hall, G., Wojtowicz, S. M., Baugh, C. M., Riley, D. O., Kubilus, C. A., Cormier, K. A., Jacobs, M. A., Martin, B. R., Abraham, C. R., Ikezu, T., Reichard, R. R., Wolozin, B. L., Budson, A. E., Goldstein, L. E., Kowall, N. W., Cantu, R. C. (2013). The spectrum of disease in chronic traumatic encephalopathy. Brain, 136(1), 43-64. DOI: 10.1093/brain/aws307
Dovbeshko, G. I., Gridina, N. Y., Kruglova, E. B., Pashchuk, O. P. (2000). FTIR spectroscopy studies of nucleic acid damage. Talanta, 53(1), 233–246.
Martynenko, O. V., Zolochevsky, O. O., Allena, R. (2017). Long term evolution of bone reconstruction with bone graft substitutes. The Journal of V. N. Karazin Kharkiv National University. Series «Medicine», (33), 107–118. https://periodicals.karazin.ua/medicine/article/view/9153
Zolochevsky, O. O., Martynenko, O. V. (2019). Biomechanical analysis of tension-compression asymmetry, anisotropy and heterogeneity of bone reconstruction in response to periprosthetic fracture repair. The Journal of V. N. Karazin Kharkiv National University, Series «Medicine», (37), 19–32. DOI: https://doi.org/10.26565/2313-6693-2019-37-03
Czekanski, A., Martynenko, A. V., Zozulya, V. V. (2018). Modeling of heart muscles. In Altenbach H., Öchsner A. (eds.), Encyclopedia of Continuum Mechanics (pp. 1–11).Berlin: Springer. DOI: 10.1007/978-3-662-53605-6_279-1.
Miller, K. (2011). Introduction. In MillerK. (ed.), Biomechanics of the Brain (pp. 1–4).New York: Springer.
Bilston, L. E. (2011). Brain tissue mechanical properties. In BilstonL. E. (ed.), Neural Tissue Biomechanics (pp. 11–24).Berlin: Springer.
Yang, K.H., King, A.I. (2011). Modeling of the brain for injury simulation and prevention. In Miller K. (ed.), Biomechanics of the Brain (pp. 91–110). New York: Springer.
Horgan, T. J., Gilchrist, M. D. (2003). The creation of three-dimensional finite element models for simulating head impact biomechanics. International Journal of Crashworthiness, 8(4), 353–366.
Cinelli, I., Destrade, M., McHugh, P., Trotta, A., Gilchrist, M., Duffy, M. (2019). Head-to-nerve analysis of electromechanical impairments of diffuse axonal injury. Biomechanics and Modeling in Mechanobiology, 18(2), 361–374. DOI: 10.1007/s10237-018-1086-8
Budday, S., Ovaert, T. C., Holzapfel, G. A., Steinmann, P., Kuhl, E. (2019). Fifty shades of brain: A review on the mechanical testing and modeling of brain tissue. Archives of Computational Methods in Engineering, 1-44. DOI: 10.1007/s11831-019-09352-w
Goriely, A., Budday, S., Kuhl, E. (2015).Neuromechanics: From neurons to brain. In Bordas S.P.A., Balint D. S. (eds.), Advances in Applied Mechanics (vol. 48, pp. 79–139). Burlington: Academic Press. DOI: 10.1016/bs.aams.2015.10.002
Atsumi, N., Nakahira, Y., Iwamoto, M. (2016). Development and validation of a head/brain FE model and investigation of influential factor on the brain response during head impact. International Journal of Vehicle Safety, 9(1), 1–23. DOI: 10.1504/IJVS.2016.077145
Mendis, K. (1992). Finite Element Modeling of the Brain to Establish Diffuse Axonal Injury Criteria. Ph.D Thesis, Columbus: The Ohio State University.
Zhang, L., Yang, K. H., King, A. I. (2001). Comparison of brain responses between frontal and lateral impacts by finite element modeling. Journal of Neurotrauma, 18(1), 21–30.
Atsumi, N., Nakahira, Y., Iwamoto, M., Hirabayashi, S., Tanaka, E. (2016). Constitutive modeling of brain parenchyma taking account of strain rate dependency with anisotropy and application to brain injury analyses (No. 2016–01–1485). SAE Technical Paper. DOI: 10.4271/2016-01-1485, 13p.
Atsumi, N., Nakahira, Y., Tanaka, E., Iwamoto, M. (2018). Human brain modeling with its anatomical structure and realistic material properties for brain injury prediction. Annals of Biomedical Engineering, 46(5), 736-748. DOI: 10.1007/s10439-018-1988-8
Fernandes, F. A., Tchepel, D., Alves de Sousa, R. J., Ptak, M. (2018). Development and validation of a new finite element human head model: Yet another head model (YEAHM). Engineering Computations, 35(1), 477-496. DOI: 10.1108/EC-09-2016-0321
Wang, F., Han, Y., Wang, B., Peng, Q., Huang, X., Miller, K., Wittek, A. (2018). Prediction of brain deformations and risk of traumatic brain injury due to closed-head impact: Quantitative analysis of the effects of boundary conditions and brain tissue constitutive model. Biomechanics and Modeling in Mechanobiology, 17(4), 1165-1185. DOI: 10.1007/s10237-018-1021-z
Mao, H., Zhang, L., Jiang, B., Genthikatti, V. V., Jin, X., Zhu, F., Makwana, R., Gill, A., Jandir, G., Singh, A., Yang, K. H. (2013). Development of a finite element human head model partially validated with thirty five experimental cases. Transactions of the ASME. Journal of Biomechanical Engineering, 135(11), 111002-1- 111002-15.
Duckworth, H., Ghajari, M. (2019). Modelling brain biomechanics using a hybrid smoothed particle hydrodynamics and finite element model. In 2019 Ohio State University Injury Biomechanics Symposium, USA, 14 p.
http://ibrc.osu.edu/wp-content/uploads/2019/05/2019-IBS-Manuscript_Duckworth.pdf.
Giudice, J. S., Zeng, W., Wu, T., Alshareef, A., Shedd, D. F., Panzer, M. B. (2019). An analytical review of the numerical methods used for finite element modeling of traumatic brain injury. Annals of Biomedical Engineering, 47(9), 1855-1872. DOI: 10.1007/s10439-018-02161-5
Horstemeyer, M. F., Berthelson, P. R., Moore, J., Persons, A. K., Dobbins, A., Prabhu, R. K. (2019). A mechanical brain damage framework used to model abnormal brain tau protein accumulations of National Football League players. Annals of Biomedical Engineering, 47(9), 1873-1888. DOI: 10.1007/s10439-019-02294-1
Berger, J., Horton, A., Joldes, G., Wittek, A., Miller, K. (2008). Coupling finite element and mesh-free methods for modelling brain deformation in response to tumour growth. In Computational Biomechanics for Medicine III MICCAI-Associated Workshop, 14 p. http://hdl.handle.net/10380/1383
Miller, K., Wittek, A., Joldes, G., Horton, A., Dutta‐Roy, T., Berger, J., Morriss, L. (2010). Modelling brain deformations for computer‐integrated neurosurgery. International Journal for Numerical Methods in Biomedical Engineering, 26(1), 117–138.
Miller, K., Joldes, G. R., Bourantas, G., Warfield, S. K., Hyde, D. E., Kikinis, R., Wittek, A. (2019). Biomechanical modeling and computer simulation of the brain during neurosurgery. International Journal for Numerical Methods in Biomedical Engineering, 35(10), e3250. DOI: 10.1002/cnm.3250
Chen, X., Sarntinoranont, M. (2007). Biphasic finite element model of solute transport for direct infusion into nervous tissue. Annals of Biomedical Engineering, 35(12), 2145-2158.
Wagner, A., Ehlers, W. (2010). Continuum‐mechanical analysis of human brain tissue. PAMM, 10(1), 99-100.
Støverud, K. H., Darcis, M., Helmig, R., Hassanizadeh, S. M. (2012). Modeling concentration distribution and deformation during convection-enhanced drug delivery into brain tissue. Transport in Porous Media, 92(1), 119-143.
Bottaro, A., Ansaldi, T. (2012). On the infusion of a therapeutic agent into a solid tumor modeled as a poroelastic medium. Journal of Biomechanical Engineering, 134(8), 084501.
Ehlers, W., Wagner, A. (2015). Multi-component modelling of human brain tissue: A contribution to the constitutive and computational description of deformation, flow and diffusion processes with application to the invasive drug-delivery problem. Computer Methods in Biomechanics and Biomedical Engineering, 18(8), 861-879. DOI: 10.1080/10255842.2013.853754
Fink, D., Wagner, A., Ehlers, W. (2018). Application-driven model reduction for the simulation of therapeutic infusion processes in multi-component brain tissue. Journal of Computational Science, 24, 101-115. DOI: 10.1016/j.jocs.2017.10.002
Ehlers, W., Wagner, A. (2019). Modelling and simulation methods applied to coupled problems in porous-media mechanics. Archive of Applied Mechanics, 89(4), 609–628.DOI: 10.1007/s00419-019-01520-5
Cheng, S., Bilston, L. E. (2007). Unconfined compression of white matter. Journal of Biomechanics, 40(1), 117–124.
Budday, S., Nay, R., de Rooij, R., Steinmann, P., Wyrobek, T., Ovaert, T. C., Kuhl, E. (2015). Mechanical properties of gray and white matter brain tissue by indentation. Journal of the Mechanical Behavior of Biomedical Materials, 46, 318-330. DOI: 10.1016/j.jmbbm.2015.02.024
Miller, K., Chinzei, K. (2002). Mechanical properties of brain tissue in tension. Journal of Biomechanics, 35(4), 483–490.
Hrapko, M., Van Dommelen, J. A. W., Peters, G. W. M., Wismans, J. S. H. M. (2006). The mechanical behaviour of brain tissue: Large strain response and constitutive modelling. Biorheology, 43(5), 623–636.
Forte, A. E., Gentleman, S. M., Dini, D. (2017). On the characterization of the heterogeneous mechanical response of human brain tissue. Biomechanics and Modeling in Mechanobiology, 16(3), 907–920. DOI: 10.1007/s10237-016-0860-8
Franceschini, G., Bigoni, D., Regitnig, P., Holzapfel, G. A. (2006). Brain tissue deforms similarly to filled elastomers and follows consolidation theory. Journal of the Mechanics and Physics of Solids, 54(12), 2592–2620.
Zolochevskii, A. A. (1988). Modification of the theory of plasticity of materials differently resistant to tension and compression for simple loading processes. International Applied Mechanics, 24(12), 1212–1217.
Zolochevskii, A. A. (1990). Method of calculating the strength of mine pipes formed from materials that behave differently under tension and compression. Strength of Materials, 22(3), 422–428.
Mahnken, R., Schlimmer, M. (2005). Simulation of strength difference in elasto‐plasticity for adhesive materials. International Journal for Numerical Methods in Engineering, 63(10), 1461–1477.
Zolochevsky, A. A. (2007). On the choice of the invariants of the stress tensor in the refinement of the governing equations of solid mechanics for isotropic materials.Journal of the National Technical University «Kharkiv Polytechnic Institute». Series «Machine-building and CAD», (29), 58–64.
Lomakin, E.V. (2011) Constitutive models of mechanical behavior of media with stress state dependent material properties. InAltenbach H., Maugin G., Erofeev V. (eds.), Mechanics of Generalized Continua (vol. 7, pp. 339–350). Advanced Structured Materials.Berlin: Springer.
Beskopylny, A., Meskhi, B., Kadomtseva, E., Strelnikov, G. (2020). Transverse impact on rectangular metal and reinforced concrete beams taking into account bimodularity of the material. Materials, 13(7), 1579–1–1579–14. DOI: 10.3390/ma13071579
Franceschini, G. (2006). The Mechanics of Human Brain Tissue. Ph. D. thesis, Trento: University of Trento.
Velardi, F., Fraternali, F., Angelillo, M. (2006). Anisotropic constitutive equations and experimental tensile behavior of brain tissue. Biomechanics and Modeling in Mechanobiology, 5(1), 53-61.
Hrapko, M., Van Dommelen, J. A., Peters, G. W., Wismans, J. S. (2008). The influence of test conditions on characterization of the mechanical properties of brain tissue. Journal of Biomechanical Engineering, 130(3), 031003.
Feng, Y., Okamoto, R. J., Namani, R., Genin, G. M., Bayly, P. V. (2013). Measurements of mechanical anisotropy in brain tissue and implications for transversely isotropic material models of white matter. Journal of the Mechanical Behavior of Biomedical Materials, 23, 117–132.
Schmidt, J. L., Tweten, D. J., Badachhape, A. A., Reiter, A. J., Okamoto, R. J., Garbow, J. R., Bayly, P. V. (2018). Measurement of anisotropic mechanical properties in porcine brain white matter ex vivo using magnetic resonance elastography. Journal of the Mechanical Behavior of Biomedical Materials, 79, 30–37. DOI: 10.1016/j.jmbbm.2017.11.045
Haldar, K., Pal, C. (2018). Rate dependent anisotropic constitutive modeling of brain tissue undergoing large deformation. Journal of the Mechanical Behavior of Biomedical Materials, 81, 178–194. DOI: 10.1016/j.jmbbm.2017.12.021
Kalra, P., Raterman, B., Mo, X., Kolipaka, A. (2019). Magnetic resonance elastography of brain: Comparison between anisotropic and isotropic stiffness and its correlation to age. Magnetic Resonance in Medicine, 82(2), 671–679. DOI: 10.1002/mrm.27757
Zolochevsky, A. A. (1982). Creep of Thin Shells for Materials with Different Behavior in Tension and Compression. Ph. D. Thesis, Kharkov: National Academy of Sciences of Ukraine, Institute of Mechanical Engineering Problems, 198 p.
Altenbach, H., Dankert, M., Zoločevskij, A. (1990). Anisotrope mathematisch-mechanische Modelle für Werkstoffe mit von der Belastung abhängigen Eigenschaften. Technische Mechanik, 11(1), 5–13.
Zolochevsky, A. (1995). The formulation of constitutive equations for anisotropic materials with different behaviour in tension and compression. In Parker D. F. and England A. H. (eds.), IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics (pp. 351–356). Dordrecht: Springer.
Zolochevsky, A. (1996). Identification of damage variable in ceramic matrix composite with different behaviour in tension and compression. In Fracture Mechanics of Ceramics (pp. 413–428). Boston: Springer.
Zolochevsky, A. A. (2007). On the choice of the anisotropy tensors in the refinement of the governing equations of solid mechanics for anisotropic materials. Journal of the National Technical University «Kharkiv Polytechnic Institute». Series «Machine-building and CAD», (29), 64–71.
Jones, R. M. (2009). Deformation Theory of Plasticity. Blacksburg: Bull Ridge Corporation, 640 p.
Treschev, A. A., Zhurin, E. A. (2020). Bending of ring plates, performed from an orthotropic nonlinear differently resistant material. International Journal for Computational Civil and Structural Engineering, 16(1), 130-146. DOI: 10.22337/2587-9618-2020-16-1-130-146
Budday, S., Sommer, G., Birkl, C., Langkammer, C., Haybaeck, J., Kohnert, J., Bauer, M., Paulsen, F., Steinmann, P., Kuhl, E., Holzapfel, G. A. (2017). Mechanical characterization of human brain tissue. Acta Biomaterialia, 48, 319-340. DOI: 10.1016/j.actbio.2016.10.036
Chatelin, S., Constantinesco, A., Willinger, R. (2010). Fifty years of brain tissue mechanical testing: from in vitro to in vivo investigations. Biorheology, 47(5–6), 255–276.
Dodgson, M. C. H. (1962). Colloidal structure of brain. Biorheology, 1(1), 21–30.
Galford, J. E., McElhaney, J. H. (1970). A viscoelastic study of scalp, brain, and dura. Journal of Biomechanics, 3(2), 211–221.
Budday, S., Sommer, G., Holzapfel, G. A., Steinmann, P., Kuhl, E. (2017). Viscoelastic parameter identification of human brain tissue. Journal of the Mechanical Behavior of Biomedical Materials, 74, 463–476. DOI: 10.1016/j.jmbbm.2017.07.014
Budday, S., Sommer, G., Haybaeck, J., Steinmann, P., Holzapfel, G. A., Kuhl, E. (2017). Rheological characterization of human brain tissue. Acta Biomaterialia, 60, 315–329. DOI: 10.1016/j.actbio.2017.06.024
Prevost, T. P., Balakrishnan, A., Suresh, S., Socrate, S. (2011). Biomechanics of brain tissue. Acta Biomaterialia, 7(1), 83–95.
Goriely, A., Geers, M. G., Holzapfel, G. A., Jayamohan, J., Jérusalem, A., Sivaloganathan, S., Squier, W., van Dommelen, J.A.W., Waters, S., Kuhl, E. (2015). Mechanics of the brain: Perspectives, challenges, and opportunities. Biomechanics and Modeling in Mechanobiology, 14(5), 931–965. DOI: 10.1007/s10237-015-0662-4
Labus, K. M., Puttlitz, C. M. (2016). Viscoelasticity of brain corpus callosum in biaxial tension. Journal of the Mechanics and Physics of Solids, 96, 591–604. DOI: 10.1016/j.jmps.2016.08.010
Gorev, B. V., Rubanov, V. V., Sosnin, O. V. (1979). Creep of materials with different properties in tension and compression. Strength of Materials, 11(7), 735–740.
Zolochevskij, A. A. (1988). Kriechen von Konstruktionselementen aus Materialien mit von der Belastung abhängigen Charakteristiken. Technische Mechanik, 9(3), 177–184.
Zolochevsky, A. A. (1991). Creep of isotropic and anisotropic materials with different behaviour in tension and compression. In Zyczkowski M. (ed.), Creep in Structures (pp. 217–220).Berlin: Springer.
Altenbach, H., Schieße, P., Zolochevsky, A. A. (1991). Zum Kriechen isotroper Werkstoffe mit komplizierten Eigenschaften. Rheologica Acta, 30(4), 388–399.
Mahnken, R. (2003). Creep simulation of asymmetric effects by use of stress mode dependent weighting functions. International Journal of Solids and Structures, 40(22), 6189–6209.
Betten, J., Sklepus, A., Zolochevsky, A. (2003). A constitutive theory for creep behavior of initially isotropic materials sustaining unilateral damage. Mechanics Research Communications, 30(3), 251–256.
Tsvelodub, I. (2012). Construction of constitutive equations of creep in orthotropic materials with different properties under tension and compression. Journal of Applied Mechanics and Technical Physics, 53(6).
Banshchikova, I. A., Larichkin, A. Y. (2018). Torsion of solid rods with account for the different resistance of the material to tension and compression under creep. Journal of Applied Mechanics and Technical Physics, 59(6), 1067-1077. DOI: 10.1134/S0021894418060123
Ayata, C., Ropper, A. H. (2002). Ischaemic brain oedema. Journal of Clinical Neuroscience, 9(2), 113–124.
Walberer, M., Ritschel, N., Nedelmann, M., Volk, K., Mueller, C., Tschernatsch, M., Stolz, E., Blaes, F., Bachmann, G., Gerriets, T. (2008). Aggravation of infarct formation by brain swelling in a large territorial stroke: a target for neuroprotection? Journal of Neurosurgery, 109(2), 287–293.
Raslan, A., Bhardwaj, A. (2007). Medical management of cerebral edema. Neurosurgical Focus, 22(5), 1–12.
Thiex, R., Tsirka, S. E. (2007). Brain edema after intracerebral hemorrhage: Mechanisms, treatment options, management strategies, and operative indications. Neurosurgical Focus, 22(5), 1–7.
Zolochevsky, A., Hop, J. G., Servant, G., Foosnæs, T., Øye, H. A. (2003). Creep and sodium expansion in a semigraphitic cathode carbon. In Crepeau P. N. (ed.), Light Metals (pp. 595–602). Warrendale: The Minerals, Metals and Materials Society.
Zolochevsky, A., Hop, J. G., Foosnæs, T., Øye, H. A. (2005). Surface exchange of sodium, anisotropy of diffusion and diffusional creep in carbon cathode materials. In Kvande H. (ed.), Light Metals (pp. 745–750). San Francisco: The Minerals, Metals and Materials Society.
Zolochevsky, A. (2008). Degradation of perovskite-type ceramic membranes determined by defect chemistry modeling and chemically induced stress analysis. Journal of the National Technical University «Kharkiv Polytechnic Institute». Series «Machine-building and CAD», (2), 95–104.
Zolochevsky, A., Parkhomenko, L., Kühhorn, A. (2012). Analysis of oxygen exchange-limited transport and chemical stresses in perovskite-type hollow fibers. Materials Chemistry and Physics, 135(2–3), 594–603.
Zolochevsky, A., Grabovskiy, A. V., Parkhomenko, L., Lin, Y.S. (2013). Transient analysis of oxygen non-stoichiometry and chemically induced stresses in perovskite-type ceramic membranes for oxygen separation. Journal of the National Technical University "Kharkiv Polytechnic Institute". Series «Machine-building and CAD », (1), 179-189.
Crank, J. (1979). The Mathematics of Diffusion. Second Edition, New York: Oxford University Press, 414p.
Zolochevsky, A., Tkachuk, N. N., Viricelle, J. P., Pijolat, C. (2007). Chemically induced stresses in the cathode of single chamber solid oxide fuel cell.Journal of the National Technical University «Kharkiv Polytechnic Institute». Series «Machine-building and CAD », (23), 148–157.
Zolochevsky, A. A., Goncharova, G. V., Minko, A.I., Shalashova, I. V. (2008). Modelling of diffusion induced stresses affected by the psychoactive media in the blood vessels of biomechanical system. Journal of the National Technical University «Kharkiv Polytechnic Institute». Series «Machine-building and CAD», (9), 90–97.
Eggen, C., Lin, Y. S., Goncharova, G., Zolochevsky, A. (2009). Diffusion characteristics of a supported lipid bilayer membrane on a dense cylindrical silica optical fibrous support. In 2009 AIChE Annual Meeting, Nashville, USA, 20p.
Arifin, D. Y., Lee, L. Y., Wang, C. H. (2006). Mathematical modeling and simulation of drug release from microspheres: Implications to drug delivery systems. Advanced Drug Delivery Reviews, 58(12–13), 1274-1325.
Elkin, B. S., Shaik, M. A., Morrison III, B. (2010). Fixed negative charge and the Donnan effect: a description of the driving forces associated with brain tissue swelling and oedema. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 368(1912), 585–603.
Lang, G. E., Stewart, P. S., Vella, D., Waters, S. L., Goriely, A. (2014). Is the Donnan effect sufficient to explain swelling in brain tissue slices? Journal of the Royal Society Interface, 11(96), 20140123.
Lang, G. E. (2014). Mechanics of Swelling and Damage in Brain Tissue: A Theoretical Approach. Ph.D Thesis, Oxford: University of Oxford.
Hodgkin, A. L., Huxley, A. F. (1952). A quantitative description of membrane current and its application to conduction and excitation in nerve. The Journal of Physiology, 117(4), 500–544.
Chen, H., Garcia-Gonzalez, D., Jérusalem, A. (2019). Computational model of the mechanoelectrophysiological coupling in axons with application to neuromodulation. Physical Review E, 99(3), 032406-1-032406-18. DOI: 10.1103/PhysRevE.99.032406
Iwasa, K., Tasaki, I., Gibbons, R. C. (1980). Swelling of nerve fibers associated with action potentials. Science, 210(4467), 338–339.
Galbraith, J. A., Thibault, L. E., Matteson, D. R. (1993). Mechanical and electrical responses of the squid giant axon to simple elongation.Transactions of the ASME. Journal of Biomechanical Engineering, 115, 13–22.
Akkin, T., Landowne, D., Sivaprakasam, A. (2009). Optical coherence tomography phase measurement of transient changes in squid giant axons during activity. Journal of Membrane Biology, 231(1), 35-46.
Mosbacher, J., Langer, M., Hörber, J. K. H., Sachs, F. (1998). Voltage-dependent membrane displacements measured by atomic force microscopy. The Journal of General Physiology, 111(1), 65–74.
Zhang, P. C., Keleshian, A. M., Sachs, F. (2001). Voltage-induced membrane movement. Nature, 413(6854), 428–432.
Inoue, H., Mori, S. I., Morishima, S., Okada, Y. (2005). Volume‐sensitive chloride channels in mouse cortical neurons: Characterization and role in volume regulation. European Journal of Neuroscience,1(6), 1648–1658.
Akita, T., Okada, Y. (2014). Characteristics and roles of the volume-sensitive outwardly rectifying (VSOR) anion channel in the central nervous system. Neuroscience, 275, 211–231.
Kachanov, L. M. (1958). On the rupture time under the condition of creep. Izvestiya Akademii Nauk SSSR. Otdelenie Tekhnicheskikh Nauk, (8), 26–31.
Rabotnov, Y. N. (1959). A mechanism of a long time failure. In Creep Problems in Structural Members (pp. 5–7). Moscow: USSR Academy of Science Publishing.
Chaboche, J. L. (1992). Damage induced anisotropy: On the difficulties associated with the active/passive unilateral condition. International Journal of Damage Mechanics, 1(2), 148–171.
Altenbach, H., Altenbach, J., Zolochevsky, A. (1995). Erweiterte Deformationsmodelle und Versagenskriterien der Werkstoffmechanik. Stuttgart: Deutsher Verlag für Grundstoffindustrie, 172 S.
Zolochevsky, A., Yeseleva, E., Ehlers, W. (2005). An anisotropic model of damage for brittle materials with different behavior in tension and compression. Forschung im Ingenieurwesen, 69(3), 170–180.
Zolochevsky, A. A., Sklepus, A. N., Sklepus, S. N. (2011). Nonlinear Solid Mechanics. Kharkiv: Garant, 719 p.
Bain, A. C., Meaney, D. F. (2000). Tissue-level thresholds for axonal damage in an experimental model of central nervous system white matter injury. Journal of Biomechanical Engineering, 122(6), 615–622.
Lang, G. E., Vella, D., Waters, S. L., Goriely, A. (2015). Propagation of damage in brain tissue: Coupling the mechanics of edema and oxygen delivery. Biomechanics and Modeling in Mechanobiology, 14(6), 1197–1216. DOI: 10.1007/s10237-015-0665-1
Pogoda, K., Janmey, P. A. (2018). Glial tissue mechanics and mechanosensing by glial cells. Frontiers in Cellular Neuroscience, 12, 25/1-25/9. DOI: 10.3389/fncel.2018.00025
Franze, K., Janmey, P. A., Guck, J. (2013). Mechanics in neuronal development and repair. Annual Review of Biomedical Engineering, 15, 227-251.
Washizu, K. (1975). Variational Methods in Elasticity and Plasticity. Third edition, Oxford: Pergamon Press.
Zolochevskii, A. A. (1982). Allowance for differences in strain resistance in the creep of isotropic and anisotropic materials. Journal of Applied Mechanics and Technical Physics, 23(4), 591–596.
Zolochevskii, A. A. (1985). Tensor relationship in the theories of elasticity and plasticity of anisotropic composite materials with different tensile and compressive strength. Mechanics of Composite Materials, 21(1), 41–46.
Zolochevskii, A.A. (1985). Determining equations and some problems of the variable-modulus theory of elasticity of anisotropic material. Journal of Applied Mechanics and Technical Physics, 26(4), 572–578.
Schwiedrzik, J. J., Wolfram, U., Zysset, P. K. (2013). A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales. Biomechanics and Modeling in Mechanobiology, 12(6), 1155-1168.
Levrero-Florencio, F., Margetts, L., Sales, E., Xie, S., Manda, K., Pankaj, P. (2016). Evaluating the macroscopic yield behaviour of trabecular bone using a nonlinear homogenisation approach. Journal of the Mechanical Behavior of Biomedical Materials, 61, 384-396. DOI: 10.1016/j.jmbbm.2016.04.008
Panyasantisuk, J., Pahr, D. H., Zysset, P. K. (2016). Effect of boundary conditions on yield properties of human femoral trabecular bone. Biomechanics and Modeling in Mechanobiology, 15(5), 1043–1053. DOI: 10.1007/s10237-015-0741-6
Schwiedrzik, J., Raghavan, R., Rüggeberg, M., Hansen, S., Wehrs, J., Adusumalli, R. B., Zimmermann, T., Michler, J. (2016). Identification of polymer matrix yield stress in the wood cell wall based on micropillar compression and micromechanical modelling. Philosophical Magazine, 9(32–34), 3461–3478. DOI: 10.1080/14786435.2016.1235292
Levrero-Florencio, F., Manda, K., Margetts, L., Pankaj, P. (2017). Effect of including damage at the tissue level in the nonlinear homogenisation of trabecular bone. Biomechanics and Modeling in Mechanobiology, 16(5), 1681–1695. DOI: 10.1007/s10237-017-0913-7
Levrero-Florencio, F., Manda, K., Margetts, L., Pankaj, P. (2017). Nonlinear homogenisation of trabecular bone: Effect of solid phase constitutive model. Proceedings of the Institution of Mechanical Engineers. Part H: Journal of Engineering in Medicine, 231(5), 405–414. DOI: 10.1177/0954411916676220
Speed, A., Groetsch, A., Schwiedrzik, J. J., Wolfram, U. (2019). Extrafibrillar matrix yield stress and failure envelopes for mineralised collagen fibril arrays. Journal of the Mechanical Behavior of Biomedical Materials, 103563-1-103563-39. DOI: 10.1016/j.jmbbm.2019.103563
Stipsitz, M., Zysset, P. K., Pahr, D. H. (2019). Efficient materially nonlinear μFE solver for simulations of trabecular bone failure. Biomechanics and Modeling in Mechanobiology, 19(5), 861–874. DOI:10.1007/s10237-019-01254-x
Bertoldi, K., Bigoni, D., Drugan, W. J. (2008). Nacre: An orthotropic and bimodular elastic material. Composites Science and Technology, 68(6), 1363–1375.
Sun, J. Y., Zhu, H. Q., Qin, S. H., Yang, D. L., He, X. T. (2010). A review on the research of mechanical problems with different moduli in tension and compression. Journal of Mechanical Science and Technology, 24(9), 1845–1854.
Zolochevsky, A., Sklepus, S., Kozmin, Y., Kozmin, A., Zolochevsky, D., Betten, J. (2004). Constitutive equations of creep under changing multiaxial stresses for materials with different behavior in tension and compression. Forschung im Ingenieurwesen, 68(4), 182–196.
Zolochevsky, A., Voyiadjis, G. Z. (2005). Theory of creep deformation with kinematic hardening for materials with different properties in tension and compression. International Journal of Plasticity, 21(3), 435–462.
Voyiadjis, G. Z., Thiagarajan, G. (1995). An anisotropic yield surface model for directionally reinforced metal-matrix composites. International Journal of Plasticity, 11(8), 867–894.
Voyiadjis, G. Z., Zolochevsky, A. (1998). Modeling of secondary creep behavior for anisotropic materials with different properties in tension and compression. International Journal of Plasticity, 14(10-11), 1059-1083.
Lv, J., Xiao, Y., Zhou, Y., Xie, Y. (2019). Characterization and modeling of the creep behavior of fiber composites with tension and compression asymmetry. International Journal of Mechanical Sciences, 170, 105340. DOI: 10.1016/j.ijmecsci.2019.105340
Voyiadjis, G. Z., Zolochevsky, A. (1998). Creep theory for transversely isotropic solids sustaining unilateral damage. Mechanics Research Communications, 25(3), 299–304.
Cinelli, I., Destrade, M., Duffy, M., McHugh, P. (2017). Neurotrauma evaluation in a 3D electro-mechanical model of a nerve bundle. In 8th International IEEE/EMBS Conference on Neural Engineering (pp. 513–516). Shanghai: IEEE. DOI: 10.1109/NER.2017.8008402
Cinelli, I., Destrade, M., Duffy, M., McHugh, P. (2017). Electrothermal equivalent three-dimensional finite-element model of a single neuron. IEEE Transactions on Biomedical Engineering, 65(6), 1373–1381. DOI: 10.1109/TBME.2017.2752258
Squire, L., Berg, D., Bloom, F. E., Du Lac, S., Ghosh, A., Spitzer, N. C. (2012). Fundamental Neuroscience. Four Edition, Amsterdam: Academic Press, 1152 p.
Altenbach, H., Zolochevsky, A. (1991). Kriechen dünner Schalen aus anisotropen Werkstoffen mit unterschiedlichem Zug-Druck-Verhalten. Forschung im Ingenieurwesen, 57(6), 172–179.
Zolochevskii, A. A. (1993). Nonlinear asymmetric deformation of composite shells formed from materials having different tensile and compressive strengths. International Applied Mechanics, 29(11), 945–951.
Zolochevsky, A., Galishin, A., Sklepus, S., Voyiadjis, G. Z. (2007). Analysis of creep deformation and creep damage in thin-walled branched shells from materials with different behavior in tension and compression. International Journal of Solids and Structures, 44(16), 5075–5100.
Zolochevsky, A., Galishin, A., Kühhorn, A., Springmann, M. (2009). Transversal shear effect in moderately thick shells from materials with characteristics dependent on the kind of stress state under creep-damage conditions: Theoretical framework. Technische Mechanik, 29(1), 38–47.
Galishin, A., Zolochevsky, A., Kühhorn, A., Springmann, M. (2009). Transversal shear effect in moderately thick shells from materials with characteristics dependent on the kind of stress state under creep-damage conditions: Numerical modeling. Technische Mechanik, 29(1), 48–59.
Zolochevsky, A., Galishin, A., Sklepus, S., Parkhomenko, L., Gnitko, V., Kühhorn, A., Leyens, C. (2013). Benchmark creep tests for thermal barrier coatings. Journal of the National Technical University «Kharkiv Polytechnic Institute». Series «Machine-building and CAD», (23), 158-178.
Zolochevsky, A., Sklepus, S., Galishin, A., Kühhorn, A., Kober, M. (2014). A comparison between the 3D and the Kirchhoff-Love solutions for cylinders under creep-damage conditions. Technische Mechanik, 34(2), 104–113.
Zolochevsky, A., Grabovskiy, A. V., Parkhomenko, L., Lin, Y. S. (2012). Coupling effects of oxygen surface exchange kinetics and membrane thickness on chemically induced stresses in perovskite-type membranes. Solid State Ionics, 212, 55–65.
Zolochevsky, A., Becker, A.A. (2011). Introduction to ABAQUS. Kharkiv:Business Investor Group.
Zolochevsky, A., Martynenko, A., Kühhorn, A. (2012). Structural benchmark creep and creep damage testing for finite element analysis with material tension–compression asymmetry and symmetry. Computers and Structures, 100, 27–38.
The Journal of V. N. Karazin Kharkiv National University, series Medicine has following copyright terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work’s authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work, with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
