No. 28 (2021): Engineering

Статті

• EXPERIMENTAL STUDIES OF CRANE MANIPULATOR MOTION MODES. PART 1 DOI: https://doi.org/10.32820/2079-1747-2021-28-5-1

  V. Loveikin, Yu. Romasevich, О. Spodoba

  5-17

  • PDF (Українська)
• Mathematical modeling of the joint movement of mechanisms for lifting, turning and changing the crane's departure DOI: https://doi.org/10.32820/2079-1747-2021-28-18-25

  O. Podolyak, O. Khoroshylov, K. Anenko

  18-25

  • PDF (Українська)
• Surface formation under the conditions of electroerosion grinding with variable polarity of electrodes DOI: https://doi.org/10.32820/2079-1747-2021-28-26-36

  R. Strelchuk

  26-36

  • PDF (Українська)
• The influence of processing parameters on the size and quality of the surface of the chamfer when milling the edges of parts using RTC DOI: https://doi.org/10.32820/2079-1747-2021-28-37-47

  A. Skorkin, O. Kondratyuk, D. Kysla

  37-47

  • PDF (Українська)
• Improvement of metrological characteristics of calibrating units of flow measuring devices DOI: https://doi.org/10.32820/2079-1747-2021-28-48-55

  G. Kaniuk, A. Mezerya, O. Blyznychenko, м, I. Suk

  48-55

  • PDF (Українська)
• Reduction of the turbine torque measurement error by determining the settling time of oscillatory processes in the electric machine brake DOI: https://doi.org/10.32820/2079-1747-2021-28-56-65

  G. Kanyuk, A. Mezerya, O. Blyznychenko, T. Vasilecz, T. Bykova

  56-65

  • PDF (Українська)
• Reduction of the dynamic component of the error of determining the mean-integral values of the measuring parameters DOI: https://doi.org/10.32820/2079-1747-2021-28-66-74

  G. Kaniuk, A. Mezerya, A. Chebotarov, H. Blyznychenko, Yu. Bondarenko

  66-74

  • PDF (Українська)