Experimental and Simulation-Based Study on the Structural, Optical, and Mechanical Properties of PLA/ZnO Nanocomposites
Abstract
This work presents a comprehensive experimental and theoretical investigation of polylactide (PLA) nanocomposites reinforced with zinc oxide (ZnO) nanoparticles at concentrations of 0.5, 1, 3, and 5 wt.%. The dispersion state and microstructural features of ZnO within the PLA matrix were examined using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy, revealing homogeneous distribution at low filler contents and progressive agglomeration at higher loadings. X-ray diffraction analysis confirms that ZnO preserves its hexagonal wurtzite crystal structure after incorporation into the polymer matrix, while composition-dependent variations in crystallite size and lattice microstrain are found to correlate with the mechanical response of the composites. Fourier-transform infrared spectroscopy indicates interfacial interactions between PLA chains and ZnO nanoparticles, as evidenced by systematic shifts in the carbonyl stretching band and associated charge redistribution. Ultraviolet–visible spectroscopy demonstrates a significant enhancement of UV-shielding performance with increasing ZnO content, accompanied by the emergence of sub-bandgap absorption tails attributed to defect-related and interfacial electronic states. Density functional theory calculations support the experimental observations by revealing interfacial charge transfer and a slight modification of the electronic structure at the PLA/ZnO interface. The results show that ZnO incorporation improves both mechanical stiffness and UV-blocking efficiency, while an optimal ZnO loading below 1 wt.% is identified to maintain mechanical integrity and minimize agglomeration-induced degradation.
Downloads
References
A. Sharif, S. Mondal, and E. Hoque, Polylactic Acid (PLA)-Based Nanocomposites: Processing and Properties, (Springer, Cham.), pp. 233–254. https://doi.org/10.1007/978-3-030-05825-8_11
F.T. Yusupov, M.F. Akhmadjonov, D.S. Khidirov, D.K. Tolaboyev, & I.M. Tursunov, “Impact of Resistivity on Electrical Characteristics of Al-Doped ZnO/p Si Heterostructures,” East European Journal of Physics, (1), 177-183 (2025). https://doi.org/10.26565/2312-4334-2025-1-17
M. Murariu, S. Benali, Y. Paint, A.-L. Dechief, O. Murariu, J.-M. Raquez, & P. Dubois, “Adding Value in Production of Multifunctional Polylactide (PLA)-ZnO Nanocomposite Films through Alternative Manufacturing Methods,” Molecules, 26(7), 2043 (2021). https://doi.org/10.3390/MOLECULES26072043
Y. Huang, Wang, T., Zhao, X., Wang, X., Lu, Z., Yang, Y., Liao, F., & Ju, Y. (2015). Poly(lactic acid)/graphene oxide–ZnO nanocomposite films with good mechanical, dynamic mechanical, anti-UV and antibacterial properties. Journal of Chemical Technology & Biotechnology, 90(9), 1677–1684. https://doi.org/10.1002/JCTB.4476
D.S. Bajwa, J. Shojaeiarani, J.D. Liaw, & S.G. Bajwa, “Role of Hybrid Nano-Zinc Oxide and Cellulose Nanocrystals on the Mechanical, Thermal, and Flammability Properties of Poly (Lactic Acid), Polymer,” J. Compos. Sci. 5(2), 43 (2021). https://doi.org/10.3390/JCS5020043
A.H.D. Abdullah, O.D. Putri, A.K. Fikriyyah, R.C. Nissa, S. Hidayat, R.F. Septiyanto, M. Karina, & R. Satoto, “Harnessing the Excellent Mechanical, Barrier and Antimicrobial Properties of Zinc Oxide (ZnO) to Improve the Performance of Starch-based Bioplastic,” Polymer-Plastics Technology and Materials, 59(12), 1259–1267 (2020). https://doi.org/10.1080/25740881.2020.1738466
F.T. Yusupov, T.I. Rakhmonov, M.F. Akhmadjonov, M.M. Madrahimov, & S.S. Abdullayev, “Enhancing ZnO/Si Heterojunction Solar Cells: A Combined Experimental and Simulation Approach,” East European Journal of Physics, (3), 425-434 (2024). https://doi.org/10.26565/2312-4334-2024-3-51
Yusupov, F. T., Mirzaev, V. T., Rakhmonov, T. I., Nurmatov, O. R., & Khidirov, D. Sh. (2025). Enhanced optoelectronic properties of ZnO thin films through boron and fluorine co-doping. Journal of Ovonic Research, 21(3), 285-296. https://doi.org/10.15251/JOR.2025.213.285
Yusupov, F. T., Rakhmonov, T. I., Khidirov, D. S., Akhmadjanova, S. S., & Akhmadaliyev, J. A. (2025). Zn₂SnO₄ Thin Films for Photovoltaics: Structural Optimization and Charge Transport Analysis. East European Journal of Physics, (2), 335-341. https://doi.org/10.26565/2312-4334-2025-2-42
Hashemi, Arsalan & Peljo, Pekka & Laasonen, Kari. (2022). Understanding Electron Transfer Reactions using Constrained Density Functional Theory: Complications due to Surface Interactions. https://doi.org/10.1021/acs.jpcc.2c06537
Sbardella, F., Martinelli, A., Di Lisio, V., Bavasso, I., Russo, P., Tirillò, J., & Sarasini, F. (2021). Surface Modification of Basalt Fibres with ZnO Nanorods and Its Effect on Thermal and Mechanical Properties of PLA-Based Composites. 11(2), 200. https://doi.org/10.3390/BIOM11020200
Rakhmonov, Tokhir & Yusupov, Fakhriddin & Mirzaev, Valijon & Tursunov, Ikhtiyorjon & Rakhimjonov, Jakhongir & Akhmadaliyev, Javokhir. (2025). Bio-engineered ZnO/PSi nanocomposites: Structural and optical properties for biosensing applications. BIO Web of Conferences. 173. https://doi.org/10.1051/bioconf/202517303015
Arshian, M., Estaji, S., Tayouri, M. I., Mousavi, S. R., Shojaei, S., & Khonakdar, H. A. (2022). Poly(lactic acid) films reinforced with hybrid zinc oxide ‐ polyhedral oligomeric silsesquioxane nanoparticles: Morphological, mechanical, and antibacterial properties. Polymers for Advanced Technologies, 34(3), 985–997. https://doi.org/10.1002/pat.5946
Li, J., Zhen, W., Shen, D., & Han, W. (n.d.). Properties of Polylactic Acid/Zinc Oxide Pillared Saponite Nanocomposites Prepared by Solution Intercalation. https://doi.org/10.16865/j.cnki.1000-7555.2013.10.037
Pušnik Črešnar, K., Fras Zemljič, L., Papadopoulos, L., Terzopoulou, Z., Zamboulis, A., Klonos, P. A., Klonos, P. A., Bikiaris, D. N., Kyritsis, A., & Pissis, P. (2021). Effects of Ag, ZnO and TiO2 nanoparticles at low contents on the crystallization, semicrystalline morphology, interfacial phenomena and segmental dynamics of PLA. Materials Today Communications, 27, 102192. https://doi.org/10.1016/J.MTCOMM.2021.102192
Tu, Y., Zhou, L., Jin, Y., Gao, C., Ye, Z., Yang, Y. F., & Wang, Q. L. (2010). Transparent and flexible thin films of ZnO-polystyrene nanocomposite for UV-shielding applications. Journal of Materials Chemistry, 20(8), 1594–1599. https://doi.org/10.1039/B914156A
Ohashi, N. (2014). Bulk, interface and surface properties of zinc oxide. Journal of the Ceramic Society of Japan, 122(1427), 530–536. https://doi.org/10.2109/JCERSJ2.122.530
Boboev, A. Y., Yunusaliyev, N. Y., Makhmudov, K. A., Abdulkhaev, F. A., Tojiboyev, G. G., & G‘ofurjonova, M. O. (2025). Surface Morphology and Roughness of Sulfur-Doped ZnO Thin Films: Analysis Based on Atomic Force Microscopy. East European Journal of Physics, (3), 319-324. https://doi.org/10.26565/2312-4334-2025-3-30
Barman, A., De, A., & Das, M. (2020). Stabilization and Dispersion of ZnO Nanoparticles in PVA Matrix. Journal of Inorganic and Organometallic Polymers and Materials, 30(6), 2248–2257. https://doi.org/10.1007/S10904-019-01395-7
Nakagawa, H., & Iritani, K. (2025). Preparation of Particle-Reinforced Resin Using Highly Functional ZnO Particle Filler Driven by Supramolecular Interactions. https://doi.org/10.20944/preprints202505.2451.v1
Eliyan, T., Mansour, D. A., Emara, M. M., & Hegazi, E. M. (2024). Thermal, Mechanical and Electrical Properties of EPDM/ZnO Nanocomposites for High Voltage Insulators under the Effect of Gamma Radiation. IEEE Transactions on Dielectrics and Electrical Insulation, 1. https://doi.org/10.1109/tdei.2024.3414967
Pervaiz, S., Kanwal, N., Hussain, S., Saleem, M., & Khan, I. A. (2021). Study of structural, optical and dielectric properties of ZnO/PVDF-based flexible sheets. Journal of Polymer Research, 28(8), 1–13. https://doi.org/10.1007/S10965-021-02640-9
Buckley, D. H., McNulty, D., Zubialevich, V. Z., Parbrook, P. J., & O’Dwyer, C. (n.d.). Highly-Ordered Growth of Solution-Processable ZnO for Thin Film Transistors. https://doi.org/10.1149/ma2017-01/25/1219
Zheng, H. J., Zhao, Z., Liu, Y. L., Zhao, X. F., & Xi, K. H. (2012). Preparation of PLA/Nano-ZnO Composites. Advanced Materials Research, 1901–1904. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMR.476-478.1901
Restrepo, I., Benito, N., Medinam, C., Mangalaraja, R. V., Flores, P., & Rodríguez-Llamazares, S. (2017). Development and characterization of polyvinyl alcohol stabilized polylactic acid/ZnO nanocomposites. 4(10), 105019. https://doi.org/10.1088/2053-1591/AA8B8D
Rahimli, A., Huseynova, A., & Musayeva, N. (2024). Comprehensive analysis OF ZnO-Doped polystyrene nanocomposites: Structural, optical and defect analysis. Journal of Thermoplastic Composite Materials. https://doi.org/10.1177/08927057241291794
Nonato, R. C., Innocnentini Mei, L. H., Bonse, B. C., Leal, C. V., Levy, C. E., Oliveira, F. A., Delarmelina, C., Duarte, M. C. T., & Morales, A. R. (2022). Nanocomposites of PLA / ZnO nanofibers for medical applications: Antimicrobial effect, thermal, and mechanical behavior under cyclic stress. Polymer Engineering and Science, 62(4), 1147–1155. https://doi.org/10.1002/pen.25913
Basavaraj, H. G., Renuka, C. G., Harihar, C. A., Sangappa, Y., Rao, B. L., & Madhukumar, R. (2020). Physicochemical mechanical and optical properties of polymer inorganic composite thin films: Applications. 2244, 110009. https://doi.org/10.1063/5.0009947
Klok, L. A., Steffen, T. T., Sabedra, H. R., Fontana, L. C., Hammer, P., Marega, F. M., Costa, L. C., Pessan, L. A., & Becker, D. (2023). ZnO surface modification with maleic anhydride using plasma treatment. Plasma Processes and Polymers. https://doi.org/10.1002/ppap.202300165
Lauritsen, J. V., Porsgaard, S., Rasmussen, M. K., Jensen, M. C. R., Bechstein, R., Meinander, K., Clausen, B. S., Helveg, S., Wahl, R., Kresse, G., & Besenbacher, F. (2011). Stabilization Principles for Polar Surfaces of ZnO. ACS Nano, 5(7), 5987–5994. https://doi.org/10.1021/NN2017606
Copyright (c) 2026 Fakhriddin T. Yusupov, Tokhirbek I. Rakhmonov, Mekhriddin F. Akhmadjonov, Dilobarbonu E. Abdukodirova, Yelmurat Dosymov, Iftikhorjon I. Yulchiev
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
