Materials on the Basis of Zirconium for Creating of Medical Implants

  • Mykola Pylypenko National Science Center “Kharkov Institute of Physics and Technology” https://orcid.org/0000-0001-8113-8578
  • A. Drobyshevskaya National Science Center “Kharkov Institute of Physics and Technology”
  • Roman Azhazha National Science Center “Kharkov Institute of Physics and Technology”
  • Yu. Stadnik National Science Center “Kharkov Institute of Physics and Technology”
  • I. Tantsyura National Science Center “Kharkov Institute of Physics and Technology”
  • D. Kovteba National Science Center “Kharkov Institute of Physics and Technology”
Keywords: zirconium, zirconium alloy, properties, structure, metal implants

Abstract

The aspects of production workpieces from zirconium and alloy Zr1%Nb using high temperature deformation for medical implants are considered, their physical and mechanical properties are studied. The results of the temperature effect on the formation of the oxide film on the surface of these materials are presented. The changes in the structure and properties of zirconium workpieces due to exposure of thermal treatment in the air up to 800 °С are analyzed.

Downloads

Download data is not yet available.

References

Sidel'nikov A.I. Sravnitel'naja harakteristika materialov gruppy titana, ispol'zuemyh v proizvodstve sovremennyh dental'nyh implantatov // M., zh. Info-Dent. – 2000. № 5. - S. 10-12.

Shaposhnikov Ju.G., Sherepo K.M. i dr. Cirkonij dlja jeksplantatov v travmatologii i ortopedii // Ortopedija, travmatologija i protezirovanie. Har'kov. – 1993. - № 1. S. 31-33.

Luk'janchenko V.V., Maljasova M.G. Metally v implantologii // Ortopedija, travmatologija i protezirovanie. Har'kov. – 2010. - № 3. - S. 130-132.

Sherepo K.M., Parfenov A.B., Zusmanovich I.S. K voprosu o primenenii cirkonievyh splavov dlja jendoprotezov i sredstv osteosinteza // Zh. Medicinskaja tehnika. – 1992. - № 5. - S. 14-16.

Pilipenko N.N., Azhazha R.V., Tancjura I.G., Kovteba D.V., Stadnik Ju.S. Vlijanie temperatury na process obrazovanija oksidnoj plenki na poverhnosti splava Zr1%Nb // Materialy Mezhdunarodnoj konferencii po fizike radiacionnyh javlenij i radiacionnomu materialovedeniju. Alushta. - 2012. – S. 241.

Pilipenko N.N. Vlijanie ftora na vospriimchivost' splavov Zr-Nb k vysokotemperaturnomu okisleniju // VANT. Serija: «Vakuum, chistye materialy, sverhprovodniki». – 2011. - №6(76). – S.18-23.

Published
2013-06-01
Cited
How to Cite
Pylypenko, M., Drobyshevskaya, A., Azhazha, R., Stadnik, Y., Tantsyura, I., & Kovteba, D. (2013). Materials on the Basis of Zirconium for Creating of Medical Implants. East European Journal of Physics, (1059(3), 105-109. Retrieved from https://periodicals.karazin.ua/eejp/article/view/13052
Issue
No. 1059(3) (2013): The Journal of Kharkiv National University, Physical series "Nucleus, Particles, Fields", ISSN 2221-7754
Section
Original Papers

Authors who publish with this journal agree to the following terms:

    • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
    • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
    • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).