Recularities of Investigation of Mechanical Properties of TVEL Covers From Zr-1%Nb Alloys In Longitudinal and Transverse Directions
Abstract
There is presented results of mechanical properties testing of different type samples from TVEL tubes from Zr-1%Nb alloy. Held investigations with samples tension in tube type and modified samples, shape and dimensions of that are similar with such parameters of ring samples. Held comparison of mechanical properties in longitudinal and transverse directions at standard and modified samples. Notified significant differences of mechanical properties, mostly, relative lengthening (δ%) at testing of modified samples, and also with testing of ring samples with using deformation at cone insertion, in comparison with deformation in axis direction at 2 supports.
Downloads
References
GOST 10006-80. Truby metallicheskie “Metod ispytanija na rastjazhenie” [Metallic pipes "Method of tensile test]. (In Russian)
DSTU 2528-94. Raschety i ispytanija na prochnost'. “Metod ispytanija na rastjazhenie kol'cevyh obrazcov v uslovijah nagreva” [Calculations and tests of strength. "The method of testing samples on the ring stretching under heat]. – 1994. – 12p. (In Russian)
OI № 001.325-91. Metodika vypolnenija ispytanij dlja opredelenija mehanicheskih svojstv obrazcov ot trub po TU95.405-89 pri rastjazhenii. Otraslevaja instrukcija [Methods of test for determining the mechanical properties of the samples from the pipes TU95.405-89 tensile. Industry guide] M. VNIINM, 1991. – 25 s. (In Russian)
Makarov O.Ju., Prokhorov V.I., et al. Improved measurement technigues for Zr1%Nb alloy claddings mechanical properties while simple ring specimens testing. Abstracts for VI Russian Conference for Reactor Material Science, Dimitrovgrad, September 11-15, 2000. (In Russian)
Ozhigov L.S., Mitrofanov A.S., Savchenko V.I., V'jugov P.N., Krajnjuk E.A. Opredelenie plastichnosti metallicheskih trub malyh diametrov v tangencial'nom napravlenii [Determination ductility metal tubes of small diameter in the tangential direction] // Zav. Lab. Diagnostika materialov. – 2014. – T.80. – No.3. – S. 60-62. (In Russian)
Azhazha V.M., Ozhigov L.S., Lavrinenko S.D., Savchenko V.I. Issledovanie mehanicheskih harakteristik tvjel'nyh trubok iz splava Zr1%Nb ukrainskogo proizvodstva v prodol'nom i poperechnom napravlenii v intervale 20…700 oC” [Tvelnyh study of mechanical characteristics of tubes Zr1% Nb alloy Ukrainian production in longitudinal and transverse directions in the range of 20….700 °C]. i dr. // Trudy XIX Mezhdunarodnoj konferencii po fizike radiacionnyh javlenij i radiacionnomu materialovedeniju. – 6-11.IX.2010, s.190-191. (In Russian)
GOST 1497-84 Metally. Metody ispytanij na rastjazhenie [Metals. Tensile Test Methods]. (In Russian)
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).