No. 22 (2018): Машинобудування

Статті

• Ways to improve the reliability and speed of operation of the locking devices of pneumatic conveying installations for proper environmental protection

  S. Kovalevsky, G. Zalyshna

  6-10

  • PDF (Ukrainian)

• Influence of way mount under crane rail on her strain state

  N Fidrovska, I Perevoznik

  11-16

  • PDF (Ukrainian)

• Definition of maximum angle deflexion of rope which raid on the block

  N Fidrovska, A Pisarzov, V Vodolagsky

  17-21

  • PDF (Ukrainian)

• Improving the efficiency of diamond spark grinding

  F Novikov, S Ditinenko

  22-27

  • PDF (Ukrainian)

• Effective application of modern technologies of mechanical processin

  V. Polyansky

  28-33

  • PDF (Ukrainian)

• Investigation of the processing complex shaped surfaces on the basis of non-linear motion of the forming

  A Skorkin, O Kondratyuk, O Starchenko, A Protopopova

  34-40

  • PDF (Ukrainian)

• The study of the removal of the diamond layer of a circle under the influence of single electrical discharges

  R. Strelchuk

  41-48

  • PDF (Ukrainian)

• Influence of a corner of shift of cranks on dynamics of roller forming installation taking into account dissipative properties of the recuperation driving mechanism

  V Loveykin, K Pochka, Yu Romasevich, O Pochka

  49-71

  • PDF (Ukrainian)

• To the problem of computer-aided design of a retoolable tooling for sheet punching and pressing

  V Agarkov, S Yasko, E Frolov, E Deryabkina

  72-80

  • PDF (Ukrainian)

• Standardization of technological processes in polygraphy

  A. Gordeev

  81-85

  • PDF (Ukrainian)

• Selection of method and development of technology of restoration of details of autotractor technology

  E. Deryabkina, V. Oger

  86-92

  • PDF (Ukrainian)

• Development of flux for gas welding of aluminum

  E. Izotova, A. Tischenko

  93-98

  • PDF (Ukrainian)

• Development of electrodes for copper welding

  N. Kalin

  99-104

  • PDF (Ukrainian)

• Reduction of the error of measuring the oil consumption in the main oil pipelines, caused by pulsations by an unsteady of the flow

  V Kniazieva, G Kanyuk, A Mezerya, A Andreev

  105-113

  • PDF (Ukrainian)

• The principle of building a unified control card for the dimensional accuracy of engineering products

  N. Lamnauer

  114-120

  • PDF (Ukrainian)

• Research of the influence of controlled parameters in the cutting zone on the accuracy of the hole profile when treatment with an axial tool

  A. Hordeev, I. Lappo

  121-128

  • PDF (Ukrainian)

• Analysis of the work of the monorail in the stressed state, reinforced by the welding strip

  N Reznichenko, K Dereza

  129-134

  • PDF (Ukrainian)

• Thermodynamic characteristics when assembling the wheel pair of locomotives with thermal action.

  I. Mаlісkіy, І Smіrnоv

  135-141

  • PDF (Ukrainian)

• Method of calculating the absorbed dose of a movable irradiated object by accelerated electrons

  E Cherniak, R Trishch, V Morgunov

  142-147

  • PDF (Ukrainian)