Study on Conceptual Designs of Superconducting Coil for Energy Storage in SMES

Keywords: SMES, energy storage device, solenoid, toroid

Abstract

Superconducting Magnetic Energy Storage (SMES) is an exceedingly promising energy storage device for its cycle efficiency and fast response. Though the ubiquitous utilization of SMES device is restricted because of the immense cost of cryogenic refrigeration system to sustain the superconducting state but with the continuous evolution of high Tc superconductors, SMES is turning into a major contender to the existing energy storage devices in the future. Among its several parts, the superconducting coil is considered to be the most crucial segment of this technology and the inductance generated in the coil determines the quantity of stored energy.  In this paper, the possible geometrical configurations of SMES coil have been demonstrated. High Tc superconducting tapes are usually employed to form these configurations worldwide. BSCCO (Bismuth strontium calcium copper oxide)-2223 tape superconductor has been considered for studying the conceptual designs of superconducting coil of SMES. Before estimating the results, the value of critical current at different magnetic field densities and temperatures have been addressed through the study of superconducting tape characterization. Numerical results and the relationship among the several parameters for both the solenoid and toroid configurations in different specifications have been presented. Based on the results, the size ratio in solenoid and the mean toroid diameter in toroid arrangement is found to play the vigorous roles in the generation of inductance and hence the energy storage. The results also match the propensity of other studies. Suggestions for maximum energy gain from a specific solenoid configuration have been provided.  Future research scopes with alternative superconducting tapes and limitations of this study have been briefly conferred.

Downloads

Download data is not yet available.

References

X. Luo, J. Wang, M. Dooner and J. Clarke, Applied energy, 137, 511-536 (2015) https://doi.org/10.1016/j.apenergy.2014.09.081.

W. Yuan and M. Zhang, in: Handbook of Clean Energy Systems, edited by J. Yan (John Wiley & Sons, Ltd., 2015). https://doi.org/10.1002/9781118991978.hces210.

M.A. Al Zaman, S. Ahmed and N.J. Monira, in International Conference on Nanotechnology and Condensed Matter Physics (Dhaka, Bangladesh, 2018), https://doi.org/10.13140/RG.2.2.20403.53289/1.

W. Hassenzahl, IEEE Transactions on Magnetics, 25(2), 799-1802 (1989), https://doi.org/10.1109/20.92651.

C. Chao and C. Grantham, in: AUPEC 2005 Australasian Universities Power Engineering Conference, edited by M. Negnevitsky (School of Engineering, University of Tasmania, 2005), pp. 375-379.

M.R. Islam, Study of SMES technology for electric power supply and investigation of its utility and possible implementation in Bangladesh: A Project report, (University of Chittagong, July 2014).

F. Ştefănescu, Annals of the University of Craiova, Electrical Engineering series, 35, 2011, http://elth.ucv.ro/fisiere/anale/2011/33.pdf.

J. Kozak, M. Majka, L. Jaroszynski, T. Janowski, S. Kozak, B. Kondratowicz–Kucewicz and G. Wojtasiewicz, Journal of Physics: Conference Series, 234(3), 032034 (2010), https://doi.org/10.1088/1742-6596/234/3/032034.

G. Wojtasiewicz, T. Janowski, S. Kozak, B. Kondratowicz-Kucewicz and M. Majka, Journal of Physics: Conference Series, 97(1), 012019 (2008), https://doi.org/10.1088/1742-6596/97/1/012019.

J. Kozak, S. Kozak, T. Janowski and M. Majka, IEEE Transactions on Applied Superconductivity, 19(3), 1981-1984 (2009), https://doi.org/10.1109/TASC.2009.2018753.

A. Morandi, M. Fabbri, B. Gholizad, F. Grilli, F. Sirois and V.M. Zermeño, IEEE Transactions on Applied Superconductivity, 26(4), 1-6 (2016), https://doi.org/10.1109/TASC.2016.2535271.

S.S. Kalsi, D. Aized, B. Conner, G. Snitchier, J. Campbell, R.E. Schwall, J. Kellers, T. Stephanblome, A. Tromm and P. Winn, IEEE transactions on applied superconductivity, 7(2), 971-976 (1997), https://doi.org/10.1109/77.614667.

Zhu, J., Yuan, W., Coombs, T.A. and Ming, Q., 2011. Simulation and experiment of a YBCO SMES prototype in voltage sag compensation. Physica C: Superconductivity, 471(5-6), 199-204 (2011), https://doi.org/10.1016/j.physc.2010.12.015.

K. Higashikawa, T. Nakamura, K. Shikimachi, N. Hirano, S. Nagaya, T. Kiss and M. Inoue, IEEE Transactions on Applied Superconductivity, 17(2), 1990-1993 (2007), https://doi.org/10.1109/TASC.2007.898947.

R. Hott, R. Kleiner, T. Wolf and G. Zwicknagl, (2013), e-print https://arxiv.org/abs/1306.0429.

B. Kondratowicz-Kucewicz, T. Janowski, S. Kozak, J. Kozak, G. Wojtasiewicz and M. Majka, Journal of Physics: Conference Series, 234(3), 032025 (2010), https://doi.org/10.1088/1742-6596/234/3/032025.

S. Nomura, H. Tsutsui, S. Tsuji-Iio, H. Chikaraishi and R. Shimada, in Proceedings of the Fifteenth International Toki Conference on "Fusion and Advanced Technology", 81(20-22) 2535-2539 (2006), https://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=18346799.

Md. Abdullah Zaman, https://doi.org/10.13140/RG.2.2.32352.53760.

Published
2020-02-24
Cited
How to Cite
Al Zaman, M. A., Islam, M., & Maruf, H. (2020). Study on Conceptual Designs of Superconducting Coil for Energy Storage in SMES. East European Journal of Physics, (1), 111-120. https://doi.org/10.26565/2312-4334-2020-1-10